---
title: "How much loft insulation for a 6 x 4 m loft? | BuildBatch"
description: "Worked example for a 6 × 4 m loft floor: 4 rolls or packs of 8.01 m² each (32.04 m²) for one new layer of 170 mm mineral wool. Example figures."
url: https://buildbatch.co.uk/examples/insulating-a-6-by-4-m-loft/
---

[Guides](https://buildbatch.co.uk/guides/) / [Example shopping lists](https://buildbatch.co.uk/examples/)

# How much loft insulation for a 6 x 4 m loft?

A 6 × 4 m loft floor is 24 m² and needs 25.2 m² of insulation for one new layer of 170 mm mineral wool with 5% extra: 4 rolls or packs of 8.01 m² each (32.04 m²). The depths and the allowance are example figures, not a product’s and not an insulation design; what a roll covers is the maker’s own figure for one roll, a 170 mm roll of Knauf Loft Roll 44 Combi-Cut as two shops’ own listings give it: use the depth and coverage printed on the roll you choose.

This worked example covers one 6 × 4 m rectangular cold-loft floor with mineral-wool rolls. It is a quantity plan, not a design for insulation depth, ventilation, electrics or safe access.

Worked example · Updated 13 October 2026

## How this example was made

It was worked out when this page was built, by the same room planner and formulas as the editable list. The room figures are round examples. The product figures are the planner’s own, not figures for a product: a typical figure where it has found one, such as a paint’s coverage, and a labelled example otherwise. The sentence under the heading says which.

Automated tests compare its list with the planner. No price is shown or used.

## The room and assumptions

**Loft floor: 6 m × 4 m. Work: loft insulation.**

- One rectangular loft floor, 6 m × 4 m, measured in metres.
- Doors and windows are not used for a loft floor quantity.
- Loft insulation: 1 new layer of 170 mm mineral-wool roll over one rectangular horizontal cold-loft floor. This is a material quantity, not a thermal or installation design.
- Every quantity is rounded once, at the end, up to whole packs. Working uses unrounded figures.
- The figures for mineral-wool loft insulation rolls are examples, apart from the roll's coverage, which is the maker's own figure for that roll, named on the line. Enter the depth and pack coverage from the chosen roll for a closer answer.

## The shopping list

3 lines marked Need and 5 marked Check first. Lines that this job does not need are left out here; the full planner shows them too.

### Need

- Mineral-wool loft insulation rolls

  Need

  4 × 8.01 m² roll or pack (32.04 m²)

  **Why, and what to check**

  24 m² of loft floor × 1 layer, plus 5% for cuts and fitting, in rolls or packs covering 8.01 m² each.

  **Check:** This reaches 270 mm from 100 mm using 1 × 170 mm layer. Check the chosen build-up, joist spacing and roll width before buying.

  **Working:** 24 m² × 1 layer = 24 m²; plus 5% = 25.2 m². 25.2 m² ÷ 8.01 m² = 3.15, so 4 whole rolls or packs.

- Tape measure, insulation knife and safe loft access

  Need

  **Why, and what to check**

  For measuring depth and gaps, cutting rolls and moving safely above the ceiling.

  **Check:** Only stand or kneel on secure supports. Stop if access, wiring, damp, vermin, fragile materials or an unknown older material makes the loft unsafe.

- Gloves, eye protection, covered skin and suitable respiratory protection

  Need

  **Why?**

  Mineral-wool fibres and loft dust can irritate skin, eyes and breathing.

### Check first

- Eaves ventilation guards

  Check first

  **Why, and what to check**

  Loft ventilation must stay open when insulation reaches the eaves.

  **Check:** Check whether guards are needed from the roof ventilation and product instructions. Do not block eaves vents with insulation.

- Loft hatch insulation and draught seal

  Check first

  **Why, and what to check**

  The hatch interrupts the insulated loft floor.

  **Check:** Measure the hatch and choose a safe detail that still lets it open and close.

- Pipe and cold-water tank insulation

  Check first

  **Why, and what to check**

  The loft becomes colder after the floor is insulated.

  **Check:** Check every pipe and tank. Follow current guidance; do not insulate beneath a cold-water tank without a suitable design.

- Downlight covers where the checked design needs them

  Check first

  **Why, and what to check**

  Insulation can trap heat around electrical equipment.

  **Check:** Have the wiring and lights checked where needed. Follow the equipment and insulation instructions; do not cover something that must dissipate heat.

- Raised loft walkway or boarding system

  Check first

  **Why, and what to check**

  Boards laid directly on deep insulation compress it and can hide the joists.

  **Check:** If the loft is used, plan safe access and storage with a system suited to the joists and intended load. This calculator does not design it.

### What the planner still asks

This example leaves these questions unanswered, and the answer can change the list. The planner asks them beside the line each changes.

- How deep is the insulation there now?
- Does the insulation go right out to the eaves?
- Does the loft hatch need insulating and sealing?
- Any pipes or a water tank in the loft?
- Any downlights in the ceiling below?
- Will you walk or store things up there?

## Before you use it

- Measure only the floor area that will be insulated.
- Use the roll coverage, layer build-up and fitting instructions for the chosen system.
- Check ventilation, electrics, downlights, pipes, tanks, the loft hatch and safe access before work starts.

**Make it your room.** The planner opens with this example filled in. Check every measurement, then replace the planner’s product figures with the ones on your tin, roll or pack.

[Open this example in the planner](https://buildbatch.co.uk/start/#v=1&job=loft&walls=none&ceiling=none&trim=none&units=m&length=6&width=4&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&loft=quick&end=13) [See the full example list, with a shop search for each thing to buy](https://buildbatch.co.uk/list/#v=1&job=loft&walls=none&ceiling=none&trim=none&units=m&length=6&width=4&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&loft=quick&end=13)

[Other room sizes: How many rolls of loft insulation do I need? A table by loft size](https://buildbatch.co.uk/examples/how-many-rolls-of-loft-insulation-by-loft-size/) · [All example shopping lists](https://buildbatch.co.uk/examples/) · [How the estimates are worked out](https://buildbatch.co.uk/how-estimates-work/)
