---
title: "Drawing an L-shaped room and other awkward shapes | BuildBatch"
description: "An L-shaped 5 × 4 m room with a 2 × 1.5 m corner out has 17 m² of floor and an 18 m perimeter, the same as the full rectangle's. Walk the walls first."
url: https://buildbatch.co.uk/guides/drawing-an-l-shaped-room/
---

[Guides](https://buildbatch.co.uk/guides/)

# Drawing an L-shaped room and other awkward shapes

4 min read · Updated 27 September 2026

Walk round the room and write down the length of each wall in turn, then split the floor into rectangles and add their areas. The perimeter is all the wall lengths added together, and the perimeter times the height is the wall area.

Built with AI tools; not yet checked by a tradesperson.

Read here; this page sends and keeps nothing.

[Work out the paint and the flooring for this room, then change it to yours](https://buildbatch.co.uk/start/#v=1&job=both&walls=paint&ceiling=paint&trim=none&units=m&plan=0,0;5,0;5,2.5;3,2.5;3,4;0,4&height=2.4&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&floor=quick&floor.covering=laminate&floor.underlay=unsure&end=15)The planner can count a shop's own tins, so its count may differ.

![An empty room with bare floorboards, and a pencil sketch of an L shape beside a tape measure.](https://buildbatch.co.uk/img/guides/drawing-an-l-shaped-room.webp)

## Walk the walls

- Start at the door and go round clockwise, measuring each wall from corner to corner and writing the lengths down in order.
- Every change of direction is a new wall, including the two sides of a chimney breast and the back of an alcove.
- Check yourself as you go: the walls facing one way should add up to the walls facing the opposite way. If they do not, one has been misread.

For the L-shaped room in this guide the list reads: 5.0 m, 2.5 m, 2.0 m, 1.5 m, 3.0 m, 4.0 m. The check works: 5.0 = 2.0 + 3.0 one way, and 4.0 = 2.5 + 1.5 the other.

## The perimeter

Add the walls: 5.0 + 2.5 + 2.0 + 1.5 + 3.0 + 4.0 = 18 m.

That is the same as the 5 m × 4 m rectangle the room fits inside, and it always is: the notch’s two short walls, 2.0 m and 1.5 m, replace exactly the lengths missing from the long sides. Cutting a corner out of a room changes the floor, not the perimeter.

With a 2.4 m ceiling the gross wall area is 18 × 2.4 = 43.2 m², before the doors and windows come off.

## The floor area

Split the L into two rectangles. Either split works:

- **Across:** a strip 5.0 m × 2.5 m = 12.5 m², plus a block 3.0 m × 1.5 m = 4.5 m². Total 17 m².
- **Down:** a block 3.0 m × 4.0 m = 12 m², plus a strip 2.0 m × 2.5 m = 5 m². Total 17 m².

Or take the rectangle the room fits inside, 5 × 4 = 20 m², and subtract the notch, 2 × 1.5 = 3 m². Still 17 m². When two methods agree, the measurements are right.

That 17 m² is the ceiling area for paint and the floor area for flooring. With 10% extra and packs covering 1.84 m², it is 18.7 ÷ 1.84 = 10.16, so 11 packs.

## Bays, alcoves and chimney breasts

- **A bay** is another rectangle on the floor: its width across the opening times its depth. Its walls go into the walk like any others, one at a time.
- **A chimney breast** adds three walls to the walk (return, face, return) and takes its footprint off the floor: its depth × its width.
- **Alcoves** are already in the walk, so nothing extra is needed for the walls. Their floor is part of the strip beside the breast.

## Angled and curved walls

- **An angled wall** goes into the perimeter at its measured length. For the floor, split off the triangle it makes and use half its base times its height.
- **A curved wall** is measured along the curve for the perimeter. For the floor, use the rectangle that contains the curve, and accept that the estimate is a little high, which is the safe direction.

## Do it with BuildBatch

The [room planner](https://buildbatch.co.uk/room-planner/) does this from a drawing. Draw the room to scale, or start from a rectangle or an L and type the walls in turn, and it works out the floor area and the perimeter for you. You can print the drawing at a stated scale, such as 1:50 on A4, and carry the room straight into the planner for the paint and flooring it needs.

## What this guide does not cover

Sloping ceilings and dormers, which change the ceiling and wall areas in ways a floor plan does not show. Stairs and landings measured as one run. Rooms with several curved walls, where a rectangle is too rough. Moving or opening up walls, which is structural work and not for this site.

## Related guides

- [How to measure a room for paint](https://buildbatch.co.uk/guides/how-to-measure-a-room-for-paint/)
- [Measuring for laminate flooring](https://buildbatch.co.uk/guides/measuring-for-laminate-flooring/)
- [Wastage allowance explained: why 10%, and when to allow more](https://buildbatch.co.uk/guides/wastage-allowance-explained/)

## Questions

**Can I use BuildBatch for an L-shaped room?**

Yes. The room planner lets you draw the room to scale, or type each wall in turn as a list, and works out the floor area and the wall lengths for you.

**Does cutting a corner off a room change the perimeter?**

No. An L-shaped room has the same perimeter as the rectangle it fits inside, because the two short walls of the notch add up to the lengths missing from the long sides. It does have less floor.

[All calculators](https://buildbatch.co.uk/calculators/) · [Example lists and tables by room size](https://buildbatch.co.uk/examples/) · [What it costs to have it done](https://buildbatch.co.uk/labour-costs/) · [Where the figures come from](https://buildbatch.co.uk/sources/)
