---
title: "How many tiles do I need for a floor or a wall? | BuildBatch"
description: "A 4.2 × 3.6 m floor needs 12 boxes of 1.44 m². The sum, worked examples for a floor and two wall heights, what changes it, and how to tile."
url: https://buildbatch.co.uk/guides/how-many-tiles-do-i-need/
---

[Guides](https://buildbatch.co.uk/guides/)

# How many tiles do I need for a floor or a wall?

6 min read · Updated 18 October 2026

A 4.2 × 3.6 m floor needs 12 boxes of tiles that each cover 1.44 m²: 15.1 m² of floor, plus 10% for cuts. Work out the area, add the allowance, divide by what one box covers and round up.

Built with AI tools; not yet checked by a tradesperson.

Read here; this page sends and keeps nothing.

[Work out the floor tiles for this room, then change it to yours](https://buildbatch.co.uk/start/#v=1&job=flooring&walls=none&ceiling=none&trim=none&units=m&length=4.2&width=3.6&height=2.4&door=0.826x1.981&window=1.2x1.1&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&floor=quick&floor.covering=tile&floor.underlay=unsure&end=18)

The walls of a 4.2 × 3.6 m room opened out, tiled to 1.2 m: the door comes off up to that height, 17.7 m² to tile.

## The sum

Boxes = area × (1 + allowance) ÷ what one box covers, rounded up.

- **A floor’s area** is its length × its width. Split an L-shaped room into rectangles, or [draw it](https://buildbatch.co.uk/room-planner/).
- **A wall’s area** is the distance round the room × the height the tiles go to, less the doors up to that height.
- **The allowance for cuts** is 10% for tiles laid straight or in a brick bond. Use 15% for a diagonal or herringbone layout, or for tiles of 600 mm or more in a room under 5 m² (tile shops’ figures: sources).
- **What one box covers** is printed on the box.

Windows come off only when the tiles go to the ceiling: then add their reveals too.

## Worked examples

A room 4.2 m × 3.6 m, 2.4 m high, with one door (826 × 1981 mm) and one window (1200 × 1100 mm), in boxes that cover 1.44 m², with 10% for cuts.

| Tiling | Area | With 10% | Boxes of 1.44 m² |
| --- | --- | --- | --- |
| The floor | 15.12 m² | 16.632 m² | 12 |
| The walls to 1.2 m | 18.72 − 0.99 = 17.73 m² | 19.50 m² | 14 |
| The walls to the ceiling | 37.44 − 1.64 − 1.32 + 0.69 = 35.17 m² | 38.69 m² | 27 |

To the ceiling, the door and the window come off at their full height, and the window’s reveals are added: 4.6 m round its edge × 150 mm deep, 0.7 m².

## What changes it

- **The layout.** A diagonal or herringbone floor takes 15% for cuts: 17.4 m² and 13 boxes for this floor.
- **Large tiles in a small room.** Tiles of 600 mm or more in a room under 5 m² take 15% too.
- **Your reveals.** Measure their depth: a 150 mm reveal round a 1.2 × 1.1 m window is about 0.7 m² of tiling.
- **The adhesive and grout.** Both are counted from the tile’s size and are on the bags: [how much tile adhesive and grout](https://buildbatch.co.uk/guides/how-much-tile-adhesive-and-grout-do-i-need/).
- **The shade.** Buy every box with the same batch number: the shade can differ between batches. Keep a few tiles back for a repair.

Tiling a floor? The [tile calculator on floor tiles](https://buildbatch.co.uk/tile-calculator/?job=floor-tiles) gives its steps under the list, from the floor’s base to the silicone round the edge. Having a floor tiled instead: [the cost to tile a floor](https://buildbatch.co.uk/costs/floor-tiling/).

Tiles to the square metre, size by size: [how many tiles in a square metre?](https://buildbatch.co.uk/guides/how-many-tiles-in-a-square-metre/)

## How to do it

1. Get the walls flat and sound: old paper off, loose plaster made good, gloss sanded, and plaster primed if the adhesive says so.
2. Round a shower or over a bath, put the tanking on and let it dry before any tile goes up.
3. Mark a level line one tile up from the lowest point and fix a straight batten along it, so the rows start level.
4. Spread adhesive over about a square metre at a time with the notched trowel, and press each tile in with a slight twist.
5. Keep the joints even with spacers, and check each row with a level as you go.
6. Cut the edge tiles last, and finish outside corners and edges with trim.
7. Take the batten off and tile the bottom row once the adhesive has set.
8. Grout the joints with a float once the adhesive has set, then wipe the face clean with a damp sponge. Grout after 6 to 8 hours on walls, for a standard-set adhesive (BAL and ARDEX).
9. Seal where the tiles meet the bath, the basin or a worktop with silicone, not grout.

## How long it takes

A tiler lays 6 to 10 m² of standard ceramic wall tiles a day, and takes about three days to tile a medium bathroom's walls (Trade2Base and MyJobQuote). Difficulty: moderate.

## Tools and materials

- A flat, sound wall to tile on: making good, or a primer, before the tiles.
- Tanking: a waterproof layer on the walls round a shower, under the tiles.
- A notched trowel, a tile cutter or a wet saw, a spirit level, a grout float, a sponge, a bucket and a mixing paddle.
- Tile adhesive for the wall tiles.
- The wall tiles themselves.
- Tile spacers: small crosses that keep the joints even.
- Tile trim: the strips that finish an outside corner or an edge of the tiling.
- Grout that fills the joints between the wall tiles.
- A bucket and a sponge.
- Silicone sealant for the joints where tiles meet a bath, a basin or a worktop, where grout would crack.

## Common mistakes

- Starting the first row on the bath or the floor. Neither is level: start from a level batten.
- Spreading too much adhesive at once. It skins over before the tiles go on: spread a square metre at a time.
- Tiling round a shower without tanking. Grout and tiles are not waterproof on their own.
- Grouting before the adhesive has set. The tiles move: wait the time on the bag.
- Buying boxes from different batches. The shade can differ between batches. The box shows the batch.

## When to get someone in

Get a tiler in for large or heavy tiles, natural stone, a wet room, or walls that are far from flat.

**Having it done, wall tiling:** labour only, £20 to £58 per m². These are published UK figures, each its publisher's own, and not a quote: [every figure, its source and the sum for a room: wall tiling](https://buildbatch.co.uk/costs/tiling-a-bathroom/).

## Sources

- The allowance for cuts: [Tile Mountain’s guide to how many tiles you need](https://www.tilemountain.co.uk/blog/how-many-tiles-do-i-need/) and [CTD Tiles’ guide to tile layouts](https://www.ctdtiles.co.uk/tile-layouts), read 12 October 2026. The two differ on a brick bond; 10% is the lower.
- The window reveal of 150 mm is BuildBatch’s example depth, not a measurement: use your own.

The steps' times and waits:

- [Trade2Base](https://www.trade2base.com/blog/tiling-pricing-guide-uk): standard ceramic wall tiles (300 × 300 mm): 6 to 10 m² a day, for a sole tiler, read 18 October 2026.
- [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-bathroom): fully tiling the walls of a medium-sized bathroom: 3 days, read 18 October 2026.
- [BAL](https://www.bal-adhesives.com/product/bal-flex-one/): BAL Flex One: grout after 6 to 8 hours, read 18 October 2026.
- [ARDEX](https://ardex.co.uk/product/ardex-x-7/): ARDEX X 7: grout after 8 hours on walls, 24 hours on floors, read 18 October 2026.

## Questions

**How many boxes of tiles for a 4.2 m by 3.6 m floor?**

12 boxes that each cover 1.44 m². The floor is 15.1 m², 16.6 m² with 10% for cuts, and 16.6 ÷ 1.44 = 11.6, rounded up.

**How much wall do I tile if the tiles only go up to 1.2 m?**

The distance round the room × 1.2 m, less the doors up to 1.2 m. A 4.2 × 3.6 m room with one 826 mm door: 15.6 × 1.2 = 18.7 m², less 1 m² for the door, 17.7 m².

**Do I take the window off when tiling to half height?**

Not unless the tiles reach the sill. A window that starts above the tiles takes nothing off them. When the walls are tiled to the ceiling, take the window off and add its reveals.

What changed: Rewritten as a how-to page: the sum, three worked examples, what changes it, and the steps for tiling the walls.

[Tiling a bathroom? The boxes by bathroom size](https://buildbatch.co.uk/examples/how-many-wall-tiles-for-a-bathroom-by-room-size/)

[Tile adhesives by name, each with its maker's figures](https://buildbatch.co.uk/products/kind/tile-adhesive/)

[All calculators](https://buildbatch.co.uk/calculators/) · [Example lists and tables by room size](https://buildbatch.co.uk/examples/) · [What it costs to have it done](https://buildbatch.co.uk/labour-costs/) · [Where the figures come from](https://buildbatch.co.uk/sources/)
