---
title: "How much skirting and architrave do I need? | BuildBatch"
description: "One piece of skirting per wall and two legs and a head per door, cut from whole lengths. Why the length sold decides the joins as well as the count."
url: https://buildbatch.co.uk/guides/how-much-skirting-and-architrave-do-i-need/
---

[Guides](https://buildbatch.co.uk/guides/)

# How much skirting and architrave do I need?

5 min read · Updated 8 November 2026

Count pieces, not metres. Skirting is one piece for each wall, and a wall longer than the lengths sold takes whole lengths and a joined end. Architrave is two legs and a head for each door, on each side. The number of lengths comes from cutting those pieces out of whole lengths, it is often one more than the perimeter suggests, and the length you buy decides how many walls have a join.

Built with AI tools; not yet checked by a tradesperson.

Read here; this page sends and keeps nothing.

[Work out the skirting for this room, then change it to yours](https://buildbatch.co.uk/start/#v=1&job=skirting&trim=skirting&units=m&length=4.2&width=3.6&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&end=10)

![White primed skirting and architrave leaning by a bare door frame, with a mitre box and a tenon saw.](https://buildbatch.co.uk/img/guides/how-much-skirting-and-architrave-do-i-need.webp)

## Skirting: the steps

1. **Measure each wall** along the floor, corner to corner, and take each doorway’s width off its wall.
2. **Add about 5 cm to each wall** for the corner cuts and trimming.
3. **Walls longer than a length** take whole lengths, then a short end, joined with an angled cut. Allow about 5 cm more for each join.
4. **Cut the short pieces from the fewest lengths**: the longest first, each into the first length it still fits in.
5. **Count the lengths**: the whole ones, and the ones the short pieces were cut from.

## Worked example

A room 4.2 m × 3.6 m, with no doorway taken off so that the sum is plain, and skirting sold in 2.4 m lengths.

- Each 4.2 m wall is 4.25 m with the allowance: one whole 2.4 m length and an end of 1.85 m, plus 5 cm for the join, so 1.9 m.
- Each 3.6 m wall is 3.65 m: one whole length and an end of 1.3 m.
- Four whole lengths, and four ends of 1.9, 1.9, 1.3 and 1.3 m. No two ends fit in one 2.4 m length, so each takes its own.
- **8 lengths**, 19.2 m of skirting for 15.6 m of wall.

The perimeter alone says 15.6 ÷ 2.4 = 6.5, so 7 lengths. That is one short: the offcuts left after cutting the ends, 0.5 m and 1.1 m, are no use for a wall end of 1.3 m or more.

## The length sold changes the count, and the joins

The same room, 15.6 m of wall:

| Sold in | Lengths | Joins | Bought | Left over |
| --- | --- | --- | --- | --- |
| 2.4 m | 8 | 4 | 19.2 m | about 3.2 m |
| 3 m | 6 | 4 | 18 m | about 2 m |
| 4.2 m | 4 | 2 | 16.8 m | about 0.9 m |
| 4.4 m | 4 | none | 17.6 m | about 1.8 m |

In 3 m lengths the ends pair up: 1.3 m and 1.3 m share one length, 0.7 m and 0.7 m another. In 4.2 m lengths the short walls fit whole and the long walls need only a 10 cm end each, which is still a join in each. In 4.4 m lengths every wall is one piece.

BuildBatch makes the plan in each length skirting is stocked in, 2.4, 3.05, 4.2 and 4.4 m, and starts on the one that leaves the fewest joins, then the least left over: 4.4 m for this room. The lengths are typical figures, read on stockists’ and a maker’s own pages on 12 October 2026. Longer lengths are harder to carry home, so check they fit in the car before you choose them.

## Doorways

BuildBatch takes each door’s width off the run. The wall with the door is cut as two pieces, one each side of it, each with its 5 cm. It does not know which wall a door is on, so it takes the width from the shortest wall that can hold it: the long walls decide the joins. With one door 826 mm wide this room is still 4 lengths of 4.4 m, or 7 of 2.4 m where the whole walls took 8.

## Architrave

Architrave frames a door. On each side of the door it is two legs and a head:

- **Each leg**: the door’s height plus about 10 cm, in one piece. A leg is measured to the underside of the head with its top mitred, so its long point is the opening, the small gap left round the frame and the architrave’s own width: a pre-cut leg sold for a 1981 mm door, on a shop’s own page read 8 November 2026, comes to about 2.08 m at its long point, about 10 cm more than the door. A leg is never joined.
- **The head**: the door’s width plus about 25 cm, enough for the two legs’ widths (up to about 10 cm each) and the mitres.

For a door 826 mm wide and 1981 mm high, that is two legs of 2.081 m and a head of 1.076 m. In 2.1 m lengths each piece needs a length of its own: **3 lengths** for one side. Two such doors need 6: their heads, 1.076 m each, are 2.152 m together, too long to share a 2.1 m length. Two doors 762 mm wide, with heads of 1.012 m, need 5, because their heads share one.

A metric door 2040 mm high has legs of 2.14 m, which do not come out of a 2.1 m length: BuildBatch counts it in 2.2 m lengths, the longer length architrave is sold in, unless you type a length other than 2.1 m. If the door’s height plus 10 cm is more than the length you type, a leg will not come out of one length. Choose a longer length: BuildBatch refuses the count rather than join a leg.

The architrave on the other side of the door belongs to the room next door.

## Before you buy

- **Buy the lengths together**, from one batch: the profile and the finish can differ between batches and makers.
- **Fixing**: grab adhesive on a sound, flat wall; nails or screws into timber or plugs on an uneven one. BuildBatch counts the adhesive in cartridges, about 6 m of board a cartridge with two beads along the back of the board.
- **Finishing**: boards are sold bare, primed or finished. Primed boards still need a top coat; bare timber needs knotting and primer first. Caulk fills the gap along the top edge, and is counted at about 10 m a cartridge.
- **Taking the old boards off**: look out for pipes and cables behind the skirting, and do not sand old paint you are not sure about: it may contain lead.
- **With a new floor**, fit the new skirting after the floor: it sits on the floor and covers the expansion gap, so beading may not be needed. See [measuring skirting and beading](https://buildbatch.co.uk/guides/how-to-measure-skirting-and-beading/).

The [skirting board calculator](https://buildbatch.co.uk/skirting-board-calculator/) makes the cutting plan from your walls and doors. Tick “Skirting” and “Architrave”, and under the answer it shows each wall’s run, the pieces it is cut from and the joins. Choose another of the lengths it is sold in, or type your shop’s under “Skirting length” in “Change the figures”.

Having it fitted instead: [the cost to fit skirting board](https://buildbatch.co.uk/costs/fitting-skirting-board/) gives what UK cost guides publish, each with the day read, and the sum for a 4 × 3 m room.

## Questions

**How much skirting for a 4.2 m by 3.6 m room?**

15.6 m of wall, before any doorway is taken off. In 2.4 m lengths that is 8 lengths, with a join in every wall: each 4.2 m wall takes one whole length and a 1.9 m end, each 3.6 m wall one whole length and a 1.3 m end, and no two of those ends fit in one length. In 4.4 m lengths it is 4, with no join, which is the length BuildBatch starts on.

**Why not divide the perimeter by the length?**

In that room, 15.6 ÷ 2.4 = 6.5 says 7 lengths. But every wall needs its own pieces, and the offcuts left after cutting the ends (0.5 m and 1.1 m) are too short for any wall end, so the cutting plan needs 8.

**How much architrave for one door?**

On one side of a door 826 mm wide and 1981 mm high: two legs of about 2.08 m and a head of about 1.08 m, so three lengths of 2.1 m. The other side of the door needs the same again. A door 2040 mm high has legs of 2.14 m, so three lengths of 2.2 m.

What changed: Each architrave leg is the door's height plus 10 cm, about the long point of a pre-cut leg sold for a 1981 mm door, where it was plus 5 cm; a door 2040 mm high is counted in 2.2 m lengths.

[All calculators](https://buildbatch.co.uk/calculators/) · [Example lists and tables by room size](https://buildbatch.co.uk/examples/) · [What it costs to have it done](https://buildbatch.co.uk/labour-costs/) · [Where the figures come from](https://buildbatch.co.uk/sources/)
