---
title: "How much MOT Type 1 and gravel do I need? | BuildBatch"
description: "A 6 × 3 m gravel driveway takes 8 bulk bags of Type 1 at 150 mm and 2 bulk bags of gravel at 50 mm. The sum, the depths by use and how to measure."
url: https://buildbatch.co.uk/guides/how-much-type-1-and-gravel-do-i-need/
---

[Guides](https://buildbatch.co.uk/guides/)

# How much MOT Type 1 and gravel do I need?

5 min read · Updated 30 October 2026

A 6 × 3 m gravel driveway takes 8 bulk bags of MOT Type 1 at 150 mm compacted and 2 bulk bags of 20 mm gravel at 50 mm on top. A 5 × 1 m path takes 2 bulk bags of Type 1 at 100 mm and 19 bags of 25 kg of gravel.

Built with AI tools; not yet checked by a tradesperson.

Read here; this page sends and keeps nothing.

[Work out the sub-base and the gravel for this area, then change it to yours](https://buildbatch.co.uk/start/#v=1&job=groundwork&walls=none&ceiling=none&trim=none&units=m&length=6&width=3&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&groundwork=quick&groundwork.material=both&groundwork.use=driveway&end=15)

50 mm of gravel over 150 mm of compacted Type 1, the typical depths for a driveway: dig 200 mm below the finished surface. The Type 1 is spread about 195 mm deep before it is compacted.

## The sum

- **Type 1** = the area × the depth once compacted, plus 10% for spreading and an uneven dig, ÷ about 0.38 m³ a bulk bag (or 0.012 m³ a 25 kg bag). The bag’s figure is for the Type 1 compacted, so nothing more is added for settling.
- **Gravel** = the area × the depth, loose, plus 10% for spreading and raking level, ÷ about 0.5 m³ a bulk bag (or 0.015 m³ a 25 kg bag).
- **Spread the Type 1 deeper than it ends up**: about 1.3 times, so 150 mm compacted is about 195 mm spread, in layers of no more than 75 mm.

What a bag holds and what a cubic metre weighs are typical figures; the 10% is BuildBatch’s own (sources).

## Worked example

A driveway 6 m × 3 m, gravel over Type 1 at the typical depths for a driveway.

| Working | Figure | Result |
| --- | --- | --- |
| Area | 6 m × 3 m | 18 m² |
| Type 1 at 150 mm, compacted | 18 × 150 ÷ 1,000 | 2.7 m³ |
| With 10% | 2.7 × 1.1 = 2.97 m³ ÷ about 0.38 m³ a bulk bag | 8 bulk bags (or 248 bags of 25 kg) |
| What the Type 1 weighs | 8 bags of about 800 kg; 2.97 m³ at about 2.1 t a cubic metre | about 6.4 t; about 6.2 t |
| Gravel at 50 mm, loose | 18 × 50 ÷ 1,000 | 0.9 m³ |
| With 10% | 0.9 × 1.1 = 0.99 m³ ÷ about 0.5 m³ a bulk bag | 2 bulk bags |
| What the gravel weighs | 2 bags of about 825 kg; 0.99 m³ at about 1.8 t a cubic metre | about 1.65 t; about 1.78 t |

The two weights of each layer differ because a bag is sold by weight and the amount is worked by volume. The bags are what to buy.

## Depth by use

The depth each layer starts at in the planner, from the figures in makers’ and suppliers’ guides: the top of them, so the bags do not run short, except a driveway’s Type 1, where 150 mm is the figure five of them give and one supplier gives 150 to 200 mm:

| Use | Type 1, compacted | Gravel, loose |
| --- | --- | --- |
| Path | 100 mm | 50 mm |
| Driveway | 150 mm | 50 mm |
| Shed base | 100 mm | 50 mm |
| Border | 100 mm, if any | 50 mm |

A shed base is usually Type 1 alone, under slabs or concrete; a border is usually gravel alone, on a weed-control fabric.

## Measuring it

Measure the length and the width of the area to be laid. An L-shaped drive is two rectangles added together: see [the area of an L-shape](https://buildbatch.co.uk/guides/floor-area-of-an-l-shaped-room/). A curved edge is measured at its widest, which leaves a little over. Take off nothing for a drain cover until its size is known.

## What changes it

- **Soft or clay ground.** Lay more Type 1 and a geotextile under it. One supplier gives 150 to 200 mm for a driveway.
- **Bags, not bulk bags.** Where 20 bags of 25 kg or fewer cover a layer, the planner counts the bags; above that, bulk bags. The driveway’s Type 1 would be 248 bags.
- **Decorative chippings.** A 20 kg bag holds about 0.0117 m³, so a 4 × 2 m border at 50 mm takes 38 of them. Stones differ: by one maker’s figures a bag of slate or cobbles covers more ground than a bag of chippings, so read the bag.
- **A large amount.** More than 10 bulk bags is also sold as a loose load by the tonne, tipped from a lorry. The planner works its tonnes at the top of the typical weights, 2.3 t a cubic metre for Type 1 and 1.8 t for gravel, so the load is not short.

[What it costs to have a gravel driveway laid](https://buildbatch.co.uk/costs/gravel-driveway/), and tables of [Type 1](https://buildbatch.co.uk/examples/how-much-mot-type-1-by-area/) and [gravel](https://buildbatch.co.uk/examples/how-much-gravel-by-area/) by area.

## Sources

- [Marshalls: What Sub-Base Do I Need for My Project?](https://www.marshalls.co.uk/aggregates-and-block/blog/what-sub-base-do-i-need), read 30 October 2026: 75 to 100 mm for patios and garden paths, 100 to 150 mm for driveways, and 1.3 for compaction.
- [Paving Expert: sub-bases](https://www.pavingexpert.com/subbase), read 30 October 2026: 150 mm for cars and vans, 100 mm for domestic paths and patios, and compaction of around 30%.
- [Bradstone: How to Lay a Garden Path](https://www.bradstone.com/homeowner/blog/how-to-lay-a-garden-path), read 30 October 2026: a 100 mm sub-base in two 50 mm layers.
- [Mainland Aggregates: How to calculate the right quantity of aggregates](https://www.mainlandaggregates.co.uk/blog/how-to-calculate-the-right-quantity-of-aggregates-for-your-next-job.html), read 30 October 2026: gravel 50 mm on paths and driveways, 30 to 50 mm in decorative areas, and 1.6 to 1.8 t a cubic metre.
- [Breedon: FAQ](https://www.breedon-special-aggregates.co.uk/faq/), read 30 October 2026: gravel at 40 to 50 mm, and a tonne covering about 12 m² at 50 mm.
- What a bulk bag and a 25 kg bag hold, what Type 1 weighs in place, and the laps of a membrane: typical figures from makers and suppliers, read 10 to 30 October 2026, each named on the [sources page](https://buildbatch.co.uk/sources/#typical-groundwork).
- The 10% on each layer and the 10 bulk bags above which an amount is called large are BuildBatch’s own figures.

## Questions

**How much MOT Type 1 do I need for a driveway?**

For a 6 × 3 m driveway at 150 mm compacted, 2.7 m³, 2.97 m³ with 10% for spreading: 8 bulk bags of about 800 kg, about 6.4 t of bags. At 100 mm, for a path or a shed base, the same area takes 6.

**How deep should gravel be?**

About 50 mm, laid loose, for a path, a border or a driveway: the top of the 30 to 50 mm the guides give. Larger stones, such as pebbles, are laid deeper: the supplier's own figure for the stone comes first.

**How many square metres does a bulk bag of gravel cover?**

About 10 m² at 50 mm, from a bag of about 0.5 m³. A bulk bag of Type 1 covers about 3.8 m² at 100 mm once compacted.

**How much does a tonne of gravel cover?**

About 11.1 m² at 50 mm, at 1.8 t a cubic metre loose, the top of the typical figures read (1.6 to 1.8 t), so a load ordered by the tonne is not short. Wet gravel weighs more and covers less a tonne.

What changed: New: the sum for Type 1 and gravel, the depth for a path, a driveway, a shed base or a border, and what the bags weigh.

[All calculators](https://buildbatch.co.uk/calculators/) · [Example lists and tables by room size](https://buildbatch.co.uk/examples/) · [What it costs to have it done](https://buildbatch.co.uk/labour-costs/) · [Where the figures come from](https://buildbatch.co.uk/sources/)
