---
title: "Square metres and square feet for rooms: converting both ways"
description: "1 m² is 10.764 ft². How to convert room sizes both ways, turn feet and inches into metres, and why you convert the lengths before multiplying."
url: https://buildbatch.co.uk/guides/square-metres-and-square-feet-for-rooms/
---

[Guides](https://buildbatch.co.uk/guides/)

# Square metres and square feet for rooms: converting both ways

4 min read · Updated 13 October 2026

One square metre is 10.764 square feet, and one square foot is 0.0929 square metres. For a room measured in feet and inches, convert each length to metres first (0.3048 m per foot, 0.0254 m per inch), then multiply, and you get the square metres that paint and flooring are sold by.

Built with AI tools; not yet checked by a tradesperson.

Read here; this page sends and keeps nothing.

[Work out the flooring for this room, then change it to yours](https://buildbatch.co.uk/start/#v=1&job=flooring&walls=none&ceiling=none&trim=none&units=ft&length=13ft9in&width=11ft10in&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&floor=quick&floor.covering=laminate&floor.underlay=unsure&end=15)

![An empty room with bare floorboards, a square marked in masking tape and a folded wooden rule beside it.](https://buildbatch.co.uk/img/guides/square-metres-and-square-feet-for-rooms.webp)

## The figures you need

| From | To | Multiply by |
| --- | --- | --- |
| Feet | Metres | 0.3048 |
| Inches | Metres | 0.0254 |
| Metres | Feet | 3.281 |
| Square metres | Square feet | 10.764 |
| Square feet | Square metres | 0.0929 |

The foot and the inch are defined exactly: 1 ft is 0.3048 m and 1 in is 2.54 cm. The square-foot figures are those squared and rounded.

## Why convert the lengths first

Two slips account for most wrong answers.

- **Feet and inches are not decimals.** 11 ft 10 in is 11.83 ft, not 11.10 ft. There are 12 inches in a foot, so each inch is 0.0833 ft.
- **A length figure used on an area.** 120 ft² × 0.3048 is not square metres. An area needs the area figure, 0.0929, because both sides were in feet.

Converting each length to metres before you multiply avoids both. You only ever use the length figures, and the answer comes out in square metres.

## Worked example

A room 13 ft 9 in × 11 ft 10 in.

- Length: 13 × 0.3048 + 9 × 0.0254 = 3.9624 + 0.2286 = 4.191 m
- Width: 11 × 0.3048 + 10 × 0.0254 = 3.3528 + 0.254 = 3.6068 m
- Floor area: 4.191 × 3.6068 = 15.116 m²
- In square feet: 15.116 × 10.764 = about 162.7 ft²

Check it the other way: 13.75 ft × 11.833 ft = 162.7 ft². The two agree.

Now the slip. Typed as 11.10 ft, the width becomes 3.383 m, 22 cm short, and the floor comes out at 14.179 m² instead of 15.116 m². With 10% extra and packs covering 1.84 m², that buys 9 packs when the room needs 10: one pack short, found on the last row.

## Areas at a glance

An area converts with the area figures: square metres × 10.764, or square feet × 0.0929. These are rounded to one decimal place in square feet and two in square metres.

| Square metres | Square feet |
| --- | --- |
| 5 m² | 53.8 ft² |
| 10 m² | 107.6 ft² |
| 12 m² | 129.2 ft² |
| 15 m² | 161.5 ft² |
| 20 m² | 215.3 ft² |
| 25 m² | 269.1 ft² |
| 30 m² | 322.9 ft² |
| 40 m² | 430.6 ft² |
| 50 m² | 538.2 ft² |

| Square feet | Square metres |
| --- | --- |
| 20 ft² | 1.86 m² |
| 50 ft² | 4.65 m² |
| 100 ft² | 9.29 m² |
| 120 ft² | 11.15 m² |
| 150 ft² | 13.94 m² |
| 200 ft² | 18.58 m² |
| 250 ft² | 23.23 m² |
| 300 ft² | 27.87 m² |
| 500 ft² | 46.45 m² |

So a 10 m² room is about 107.6 ft², a 12 m² room about 129.2 ft², and a 20 ft² cupboard floor is 1.86 m².

## Common room sizes

| Room in metres | m² | ft² |
| --- | --- | --- |
| 2.4 × 1.8 | 4.32 | 46.5 |
| 3 × 3 | 9 | 96.9 |
| 3.6 × 3 | 10.8 | 116.3 |
| 4.2 × 3.6 | 15.12 | 162.8 |
| 5 × 4 | 20 | 215.3 |

| Room in feet | ft² | m² |
| --- | --- | --- |
| 10 × 8 | 80 | 7.43 |
| 12 × 10 | 120 | 11.15 |
| 12 × 12 | 144 | 13.38 |
| 14 × 12 | 168 | 15.61 |
| 16 × 12 | 192 | 17.84 |

## Heights and walls

Convert the height the same way before working out the wall area: an 8 ft ceiling is 8 × 0.3048 = 2.438 m. Then the wall area is the perimeter in metres × the height in metres, as in [how to measure a room for paint](https://buildbatch.co.uk/guides/how-to-measure-a-room-for-paint/).

Coverage on a paint tin is in square metres per litre, and flooring packs state their coverage in square metres, so a room worked out in metres can be divided straight into them.

## From an area to a length

An area is a length times a width, so to turn an area into a length, divide it by the width.

- 12 m² from a roll 4 m wide is 12 ÷ 4 = **3 m** of roll.
- 120 ft² from a roll 12 ft wide is 120 ÷ 12 = **10 ft** of roll.

A length on its own has no area until you give a width. 20 ft is a distance: 20 × 0.3048 = 6.096 m. A room 20 ft long and 10 ft wide is 200 ft², which is 200 × 0.0929 = 18.58 m².

## Do it with BuildBatch

Open the [planner](https://buildbatch.co.uk/) and, in “Change the figures”, choose “Feet and inches” under “The room is measured in”. A length typed as 12’6” or 12ft 6in is read as it is, in any field, and the working is shown in metres. Switching turns the whole room over.

## What this guide does not cover

Square yards (one is 0.836 m²), if you meet them on an old quote. Volumes, for concrete or screed. Rooms that are not rectangles, which are split into rectangles first; see [floor area of an L-shaped room](https://buildbatch.co.uk/guides/floor-area-of-an-l-shaped-room/).

## Related guides

- [How to measure a room for paint](https://buildbatch.co.uk/guides/how-to-measure-a-room-for-paint/)
- [Measuring for laminate flooring](https://buildbatch.co.uk/guides/measuring-for-laminate-flooring/)
- [Floor area of an L-shaped room: two ways to work it out](https://buildbatch.co.uk/guides/floor-area-of-an-l-shaped-room/)

## Questions

**How many square feet are in a square metre?**

10.764. The other way round, one square foot is 0.0929 m².

**How do I turn square feet into a length?**

Divide the area by the width. 120 ft² from a roll 12 ft wide is 10 ft of length. A length alone, such as 20 ft, has no area until you give a width: 20 ft by 10 ft is 200 ft², or 18.58 m².

**How many square feet is 10 square metres?**

About 107.6 ft²: 10 × 10.764. Twelve square metres is about 129.2 ft², and twenty is about 215.3 ft².

**Is 12 ft 6 in the same as 12.6 ft?**

No. There are 12 inches in a foot, so 6 inches is 0.5 ft: 12 ft 6 in is 12.5 ft, or 3.81 m.

[All calculators](https://buildbatch.co.uk/calculators/) · [Example lists and tables by room size](https://buildbatch.co.uk/examples/) · [What it costs to have it done](https://buildbatch.co.uk/labour-costs/) · [Where the figures come from](https://buildbatch.co.uk/sources/)
