# Leyland Trade Hardwearing Matt

Emulsion paint · Leyland Trade

Leyland Trade Hardwearing Matt covers about 12 m² a litre, by Leyland Trade's own figures.
Source: Leyland Trade, Leyland Trade Hardwearing Matt data sheet, read 12 October 2026.

Leyland Trade gives no single number of coats for it: “Under normal conditions, allow 4 hours before applying a second coat if required” and “Strong or contrasting colours may require additional coats”.

What it is for, in the maker's words: “Suitable for interior walls and woodwork, the non yellowing formula is low odour and fast drying ensuring easy application and minimal downtime” (Leyland Trade Hardwearing Matt data sheet, read 12 October 2026).

The walls of a 3 × 4 m room, 2.4 m high, need 2.821 L in one coat (1 × 5 L) or 5.641 L in two (1 × 5 L + 1 × 2.5 L).

## Coverage

Leyland Trade states about 12 m² a litre. The maker's words: “1 litre will cover approximately 12 square metres depending on the nature and porosity of the surface”.
- Bare, rough or absorbent surfaces: A maker's coverage is their best case, on a smooth sealed surface: bare, rough or absorbent walls take more. Leyland Trade's own words: “1 litre will cover approximately 12 square metres depending on the nature and porosity of the surface”.
- A strong change of colour: Going from a dark colour to a light one, or the other way, can take another coat, and each extra coat is the paint of one coat again.
- Waste and touch-ups: The room table adds 10% for what stays in the tray and on the roller and for touching up: BuildBatch's generic example, not the maker's. The tin-by-tin figures add nothing.
- The ceiling and the woodwork: Neither is in these figures. Each is a separate paint and a separate line on a list.

## Coats

Leyland Trade gives no single number of coats for Leyland Trade Hardwearing Matt. Its words: “Under normal conditions, allow 4 hours before applying a second coat if required” and “Strong or contrasting colours may require additional coats”. Follow the tin's own instructions.

## Tin sizes

| Tin | One coat | Two coats |
|---|---|---|
| 2.5 L | about 30 m² | about 15 m² |
| 5 L | about 60 m² | about 30 m² |
| 10 L | about 120 m² | about 60 m² |

Arithmetic on the maker's figure: the litres in the tin times the coverage per litre, with nothing added for waste.

## How many tins for a room

| Room | In feet | Walls to paint | One coat | Two coats |
|---|---|---|---|---|
| 2.5 × 3 m | 8.2 × 9.8 ft | 23.57 m² | 1 × 2.5 L (2.161 L) | 1 × 5 L (4.321 L) |
| 3 × 3 m | 9.8 × 9.8 ft | 25.97 m² | 1 × 2.5 L (2.381 L) | 1 × 5 L (4.761 L) |
| 3 × 4 m | 9.8 × 13.1 ft | 30.77 m² | 1 × 5 L (2.821 L) | 1 × 5 L + 1 × 2.5 L (5.641 L) |
| 4 × 4 m | 13.1 × 13.1 ft | 35.57 m² | 1 × 5 L (3.261 L) | 1 × 5 L + 1 × 2.5 L (6.521 L) |
| 4 × 5 m | 13.1 × 16.4 ft | 40.37 m² | 1 × 5 L (3.701 L) | 1 × 5 L + 1 × 2.5 L (7.401 L) |

Each room is 2.4 m high with one internal door and one window of 1.2 × 1.1 m taken off; 10% extra for waste, BuildBatch's generic example. Worked out by the planner when the site was built.

Start a list for a 3 × 4 m room with this paint's figures: https://buildbatch.co.uk/start/#v=1&job=paint&walls=paint&ceiling=none&trim=none&units=m&length=4&width=3&height=2.4&door=0.762x1.981&window=1.2x1.1&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&wallpaint=custom&wallpaint.coats=2&wallpaint.coverage=12&wallpaint.extra=10&wallpaint.tins=2.5,5,10&wallpaint.examples=coats,extra&end=21

## Where to buy it

The page has the shops' own searches for it, and any link there that is paid for is marked Ad: https://buildbatch.co.uk/products/leyland-trade-hardwearing-matt/#where-to-buy. BuildBatch sells nothing and compares no prices.

## Questions

**How much does a litre of Leyland Trade Hardwearing Matt cover?** Leyland Trade states about 12 m² a litre for Leyland Trade Hardwearing Matt (Leyland Trade Hardwearing Matt data sheet, read 12 October 2026). A maker's coverage is their best case, on a smooth sealed surface.

**How much does a 5 litre tin of Leyland Trade Hardwearing Matt cover?** At the maker's figure a 5 L tin covers about 60 m² in one coat, or about 30 m² in two coats. That is the litres times the coverage per litre, with nothing added for waste.

**How many coats does Leyland Trade Hardwearing Matt need?** Leyland Trade gives no single number of coats for Leyland Trade Hardwearing Matt. Its words: “Under normal conditions, allow 4 hours before applying a second coat if required” and “Strong or contrasting colours may require additional coats”. Follow the tin's own instructions.

**How many tins of Leyland Trade Hardwearing Matt for a 3 × 4 m room?** The walls of a 3 × 4 m room, 2.4 m high, need 2.821 L in one coat (1 × 5 L) or 5.641 L in two (1 × 5 L + 1 × 2.5 L). The room is 2.4 m high with one door and one window taken off, with 10% extra for waste.

**What is Leyland Trade Hardwearing Matt for?** Leyland Trade says: “Suitable for interior walls and woodwork, the non yellowing formula is low odour and fast drying ensuring easy application and minimal downtime” (Leyland Trade Hardwearing Matt data sheet, read 12 October 2026).

**What tin sizes does Leyland Trade Hardwearing Matt come in?** The catalogue lists 2.5 L, 5 L and 10 L. A shop may not stock every size.

## Where the figures come from

- Leyland Trade, Leyland Trade Hardwearing Matt data sheet (https://dam-cdn.ppg.com/adaptivemedia/rendition?id=2e03387e6448f0335274f59dfbe9dd107d6e90c7): coverage, what it is for and its words on coats, read 12 October 2026.

Written with AI tools; not yet checked by a tradesperson. Follow the tin's own instructions.

The page: https://buildbatch.co.uk/products/leyland-trade-hardwearing-matt/