# Macpherson Vinyl Matt

Emulsion paint · Macpherson

Macpherson Vinyl Matt covers 15 to 16 m² a litre and takes 2 coats, by Macpherson's own figures.
Source: Macpherson, Macpherson Vinyl Matt data sheet (dated January 2016), read 12 October 2026.

What it is for, in the maker's words: “The ideal choice for interior walls and ceilings where a modern flat matt finish is required” (Macpherson Vinyl Matt data sheet (dated January 2016), read 12 October 2026).

The walls of a 3 × 4 m room, 2.4 m high, need 4.513 L: 1 × 5 L to buy. At 10 m² a litre, BuildBatch's generic example for a wall that is not the maker's best case, the same room needs 6.77 L: 1 × 5 L + 1 × 2.5 L.

## Coverage

Macpherson states 15 to 16 m² a litre. The maker's words: “Spreading rate 15-16m² per litre depending on surface texture and porosity”.
- Bare, rough or absorbent surfaces: A maker's coverage is their best case, on a smooth sealed surface: bare, rough or absorbent walls take more. Macpherson's own words: “Spreading rate 15-16m² per litre depending on surface texture and porosity”.
- A strong change of colour: Going from a dark colour to a light one, or the other way, can take another coat, and each extra coat is the paint of one coat again.
- A range, not one figure: Macpherson gives a range. The room table uses the lower figure, 15 m² a litre, so that the answer errs towards enough paint.
- Waste and touch-ups: The room table adds 10% for what stays in the tray and on the roller and for touching up: BuildBatch's generic example, not the maker's. The tin-by-tin figures add nothing.
- The ceiling and the woodwork: Neither is in these figures. Each is a separate paint and a separate line on a list.

## Coats

Macpherson gives 2 coats for Macpherson Vinyl Matt, in these words: “Apply two coats”.

## Tin sizes

| Tin | One coat | 2 coats |
|---|---|---|
| 2.5 L | 37.5 to 40 m² | 18.75 to 20 m² |
| 5 L | 75 to 80 m² | 37.5 to 40 m² |
| 10 L | 150 to 160 m² | 75 to 80 m² |

Arithmetic on the maker's figure: the litres in the tin times the coverage per litre, with nothing added for waste.

## How many tins for a room

| Room | In feet | Walls to paint | Paint needed | Tins to buy | At 10 m² a litre |
|---|---|---|---|---|---|
| 2.5 × 3 m | 8.2 × 9.8 ft | 23.57 m² | 3.457 L | 1 × 5 L | 1 × 5 L + 1 × 2.5 L |
| 3 × 3 m | 9.8 × 9.8 ft | 25.97 m² | 3.809 L | 1 × 5 L | 1 × 5 L + 1 × 2.5 L |
| 3 × 4 m | 9.8 × 13.1 ft | 30.77 m² | 4.513 L | 1 × 5 L | 1 × 5 L + 1 × 2.5 L |
| 4 × 4 m | 13.1 × 13.1 ft | 35.57 m² | 5.217 L | 1 × 5 L + 1 × 2.5 L | 1 × 10 L |
| 4 × 5 m | 13.1 × 16.4 ft | 40.37 m² | 5.921 L | 1 × 5 L + 1 × 2.5 L | 1 × 10 L |

Each room is 2.4 m high with one internal door and one window of 1.2 × 1.1 m taken off; 2 coats; 10% extra for waste, BuildBatch's generic example. Worked out by the planner when the site was built.

Start a list for a 3 × 4 m room with this paint's figures: https://buildbatch.co.uk/start/#v=1&job=paint&walls=paint&ceiling=none&trim=none&units=m&length=4&width=3&height=2.4&door=0.762x1.981&window=1.2x1.1&surface=sound&subfloor=unsure&ground=unsure&fitting=unsure&wallpaint=custom&wallpaint.coats=2&wallpaint.coverage=15&wallpaint.extra=10&wallpaint.tins=2.5,5,10&wallpaint.examples=extra&end=21

## Where to buy it

The page has the shops' own searches for it, and any link there that is paid for is marked Ad: https://buildbatch.co.uk/products/macpherson-vinyl-matt/#where-to-buy. BuildBatch sells nothing and compares no prices.

## Questions

**How much does a litre of Macpherson Vinyl Matt cover?** Macpherson states 15 to 16 m² a litre for Macpherson Vinyl Matt (Macpherson Vinyl Matt data sheet (dated January 2016), read 12 October 2026). A maker's coverage is their best case, on a smooth sealed surface.

**How much does a 5 litre tin of Macpherson Vinyl Matt cover?** At the maker's figure a 5 L tin covers 75 to 80 m² in one coat, or 37.5 to 40 m² in 2 coats. That is the litres times the coverage per litre, with nothing added for waste.

**How many coats does Macpherson Vinyl Matt need?** Macpherson gives 2 coats for Macpherson Vinyl Matt, in these words: “Apply two coats”.

**How many tins of Macpherson Vinyl Matt for a 3 × 4 m room?** The walls of a 3 × 4 m room, 2.4 m high, need 4.513 L: 1 × 5 L to buy. At 10 m² a litre, BuildBatch's generic example for a wall that is not the maker's best case, the same room needs 6.77 L: 1 × 5 L + 1 × 2.5 L. The room is 2.4 m high with one door and one window taken off, 2 coats, with 10% extra for waste.

**What is Macpherson Vinyl Matt for?** Macpherson says: “The ideal choice for interior walls and ceilings where a modern flat matt finish is required” (Macpherson Vinyl Matt data sheet (dated January 2016), read 12 October 2026).

**What tin sizes does Macpherson Vinyl Matt come in?** The catalogue lists 2.5 L, 5 L and 10 L. A shop may not stock every size.

## Where the figures come from

- Macpherson, Macpherson Vinyl Matt data sheet (dated January 2016) (https://professional.crownpaints.com//content/uploads/product-sync-resources/YJnIkHFismaQgoUw.pdf): coverage, coats and what it is for, read 12 October 2026.

Written with AI tools; not yet checked by a tradesperson. Follow the tin's own instructions.

The page: https://buildbatch.co.uk/products/macpherson-vinyl-matt/