---
title: "Sources: where the figures come from | BuildBatch"
description: "The typical figures, typical prices, pack sizes and job times BuildBatch uses, with whose each is, where it was read and the day."
url: https://buildbatch.co.uk/sources/
---

# Where the figures come from

The typical figures, typical prices, pack sizes and job times on BuildBatch come from the makers, merchants and publishers named here, with the day each was read.

Where makers disagree, we take the middle and name each one. Where no maker gives a figure, we say where ours came from. A few figures are our own examples and allowances, not a publisher's, such as the room a calculator shows before you type yours: they are not on this page. The figure on the tin, bag or pack you buy comes first. A product's own figures are on its own page, and every paint's stated coverage is in one table, [what UK paint tins say they cover](https://buildbatch.co.uk/data/paint-coverage/); the labour figures are on [what it costs to have it done](https://buildbatch.co.uk/labour-costs/). How the sums use them: [how the estimates work](https://buildbatch.co.uk/how-estimates-work/).

On this page: typical figures · typical prices · pack sizes · how long a job takes.

## Typical figures and where they were read

Where nobody can be expected to know a figure until the product is in their hand, the planner uses a typical figure, labelled “typical” on the line it makes, with where it was read and the date. Most are read from a maker's or a supplier's own page. Where makers publish different figures, a typical figure may be the middle of two or more of them, and the line names each one; where no maker or supplier publishes a figure, it is read from a trade calculator's or a guide's page, named the same way. It is never shown as the figure of the product you buy, and the figure on your own bag, tin, roll or pack comes first. This is every typical figure the planner uses, and what each was read from. The pages were read by an AI tool, and no person has checked the figures.

- **Emulsion for walls and ceilings**: 12 m² a litre and two coats, in 2.5 and 5 L tins for walls and 2.5, 5 and 10 L tins for a ceiling. The 12 is found from the makers' own coverage figures for the 103 emulsions of 18 makers that were read for BuildBatch's catalogue, each on its maker's page or data sheet, between 29 September and 12 October 2026. Each maker counts once, at the middle of its own emulsions' figures, and of the two makers in the middle (12 and 13) the lower is taken, because most of the figures are “up to” figures: the most a litre covers on a smooth, sealed surface. Of the 103, 76 are sold in a 5 L tin, 70 in a 2.5 L tin and 47 in a 10 L tin, the last chiefly trade paints and whites. A strong change of colour is counted as one coat more on the walls: [Dulux's page for its matt emulsion](https://www.dulux.co.uk/en/products/dulux-matt) says “more coats may be required” and gives no number, so the one coat is BuildBatch's own.
- **The mist coat on new plaster**: one coat of white contract matt at 12 m² a litre, in 5 and 10 L tubs, on a line of its own. The eight contract and bare-plaster matts in the catalogue state 13 to 18 m² a litre, each for a sealed surface; bare plaster is porous, so the emulsion figure of 12 is used, below all eight. Makers thin it differently ([Dulux's guide to painting new plaster](https://www.dulux.co.uk/en/expert-help/dr-dulux-painting-on-new-plaster) gives ten parts paint to one of water; two trade sheets allow more), so the line says to thin as the tin says. Read on 12 October 2026.
- **Decorating packs**, read on 6 October 2026: masking tape in 50 m rolls, the commonest length in five makers' ranges (three of the five); decorator's caulk at 10 m a cartridge of about 300 ml, the middle of six makers' data sheets, which give 8.5 to 10.5 m for a 6 mm bead (the one 12 m figure is for a 5 mm bead); cotton dust sheets of 3.6 m × 2.7 m (12 ft × 9 ft), the size all five makers read sell; lining paper in single rolls 10 m long and 53 cm wide, the narrower of the widths makers sell, so the count is not short for a wider roll.
- **Wallpaper**, read on 12 October 2026: a paper whose match is not known yet is counted as a straight match with a 64 cm repeat, the example repeat in [Graham & Brown's measuring guide](https://www.grahambrown.com/uk/how-to/measure-your-room/), which is three drops from a 10.05 m roll at an ordinary ceiling, the three [Farrow & Ball's guide](https://www.farrow-ball.com/calculating-wallpaper-quantities) gives for small pattern repeats. A packet of paste sold as a “5 roll” packet is counted as hanging 4 rolls, the lower figure on [Bartoline's data sheet](https://www.bartoline.co.uk/wp-content/uploads/2018/08/All-Purpose-Wallpaper-Adhesive-TDS.pdf) (4 to 5 rolls of ordinary paper), so a heavier paper is not left short.
- **Tile grout**, from the tile's size, the joint and the tile's thickness: the rule Norcros Adhesives prints on its wall tile grout data sheet (2014), with a specific gravity of 1.7, between the 1.75 on ARDEX's ARDEX-FLEX FL data sheet and the 1.6 on Bostik's grout listing. All three read on 10 October 2026: [Norcros Adhesives](https://www.norcros-adhesives.com/), [ARDEX UK](https://ardex.co.uk/), [Bostik](https://www.bostik.com/uk/). A joint or a thickness not entered is taken as 2 mm and 8 mm on a wall, 3 mm and 10 mm on a floor, and the line says so.
- **Tile adhesive**, from the notched trowel, in kilograms of powder a square metre. For a 6 mm notch on a wall, 3 kg: the middle of four UK makers' own sheets, rounded up so the buyer is not left short, read on 8 and 9 November 2026: [BAL Rapid-Flex One](https://www.bal-adhesives.com/wp-content/uploads/2026/03/BAL-RAPID-FLEX-ONE-MAY-25.pdf) (May 2025), "Wet Wall 6mm Notched (solid bed) 0.4m²/kg", so 2.5 kg (0.5 m² a kilogram on a dry wall, 2 kg); [Mapei Mapeker Rapid-Set Flex](https://cdnmedia.mapei.com/docs/librariesprovider12/products-documents/1_00068_mapeker-rapid-set-flex_en-gb_5f5dad090f964f5aa51a1ba07ba7bbf7.pdf?sfvrsn=f16f37b4_0) (68-4-2026 (UK)), "normal size tiles (6 mm notched trowel): 2.5-3 kg/m²"; [Saint-Gobain Weber weberset SPF](https://source.thenbs.com/product/weberset-spf/enSqJZvM4kukaLb7bKV5nc), on its NBS Source listing (Weber's own site could not be read), "3.0 kg/m² (using a notched trowel with 6 x 6 mm, notches at 12 mm centres"; and [Sika UK SikaCeram-240 Flexible Rapid](https://gbr.sika.com/dam/dms/gb01/e/sikaceram-240-flexiblerapid.pdf) (November 2021), a 20 kg bag covers "approx. 3.5 m2 using 6 mm notched trowel", about 5.7 kg. Their middle is 2.875 kg. Until 9 November 2026 the wall's row was 5.25 kg, the middle of one Malaysian sheet's range, which a floor tile up to 300 mm still takes: the four UK sheets give a floor no 6 mm figure (BAL's says to use at least a 3 mm bed and a 10 mm notched solid bed on a floor; Mapei's gives floors an 8 to 10 mm notch at 4 to 5 kg), so whether a small floor tile should take the 10 mm row instead is under review. For a 12 mm notch, 10.5 kg, the middle of the 10 to 11 kg row on [Sika's data sheet for Supracoat Tile Adhesive](https://mys.sika.com/dms/getdocument.get/a82f5dd2-556a-4bba-93a5-afe76d9e1e62/pds-supracoat-tileadhesive.pdf) (December 2024), published by Sika in Malaysia (Sika's UK site does not list it), read on 10 October 2026 and again on 8 November 2026, the only sheet found with a 12 mm notch row: no UK maker's sheet read gives one. The sheet gives its 10 to 11 kg row for large tiles up to 3600 cm² on inside floors. A wall tile up to 600 mm on its long side is counted with the 6 mm notch at the 3 kg, a floor tile up to 300 mm with the 6 mm notch at the 5.25 kg, and a wall or floor tile over 600 mm with the 12 mm one (a wall tile over 600 mm took the 6 mm notch until 19 October 2026). The 600 mm limit on a wall is BuildBatch's own rule, under review: the makers' sheets read give a wall tile over 300 × 300 mm a deeper notch on a solid bed, 10 mm on BAL's Rapid-Flex One sheet and 8 to 10 mm at 4 to 5 kg a square metre on Mapei's Mapeker Rapid-Set Flex sheet. A floor tile in between is counted at about 7 kg a square metre with a 10 mm notch: five makers' sheets read on 12 October 2026 give a floor a bed of at least 3 mm and a 10 mm notch, and 1.05 to 1.5 kg a square metre for each millimetre of bed ([BAL XL Floor One](https://www.bal-adhesives.com/wp-content/uploads/2026/03/BAL-XL-FLOOR-ONE-MAY-25.pdf), [ARDEX X 7 R](https://ardex.co.uk/wp-content/uploads/2017/06/technical-datasheet-x-7-r.pdf), and sheets from Mapei, Instarmac and Bostik); 7 kg is a bed of 5 to 6 mm at that rate. The bags' own labels state 4 to 5 m² a 20 kg bag, for a thin 3 mm bed on a flat floor, and the line says so.
- **The extra for cut tiles, and tile trim**, read on 12 October 2026: 10% for a straight lay or a brick bond, 15% for a diagonal or a herringbone lay, and 15% for a tile of 600 mm or more on its long side in a room under 5 m², from [Tile Mountain's guide](https://www.tilemountain.co.uk/blog/how-many-tiles-do-i-need/) and [CTD Tiles' guide to layouts](https://www.ctdtiles.co.uk/tile-layouts); the two disagree on a brick bond (10%, or 15%), 10% is taken, and the line says a brick bond may take more. Tile trim is counted in 2.44 m lengths, the shorter of the two usual lengths in [Homelux's range](https://homelux.co.uk/store/gun-metal-grey-straight-edge-trims/).
- **Under and round a floor**, read on 12 October 2026: underlay for laminate and wood in rolls of 15 m², counted on the floor's own area without the planks' extra for cuts ([Interfloor's Duralay Timbermate Excel](https://www.interfloor.com/underlay/duralay-timbermate-excel/) is 15.07 m² a roll; rolls of 10 and 20 m² are sold too); scotia beading in 2.4 m lengths ([Richard Burbidge's pine scotia](https://richardburbidge.com/shop/product/24-pine-back-off-scotia-mouldings-15-x-15-x-2400mm-flr6002)); carpet gripper in 1.5 m rods, the shorter of the two lengths read ([Interfloor's gripper](https://www.interfloor.com/accessories/standard-gripper-3/) is 1.52 m).
- **Vinyl planks that are glued down**, read on 12 October 2026: a smoothing compound at 4 m² from a 20 kg bag at 3 mm, the middle of the 20 kg bags read ([ARDEX Arditex NA](https://ardex.co.uk/product/arditex-na/) gives 5 m², Bostik's Cempolay Ultra Strong 4 m²); its primer at 50 m² from a 2.5 L bottle thinned for an absorbent floor ([Setcrete's acrylic primer](https://setcrete.co.uk/product/acrylic-primer/)); and the adhesive at 4 m² a litre, 20 m² from a 5 L tub, the middle of the 3 to 5 m² a litre [F. Ball's Styccobond F46 data sheet](https://f-ball.com/wp-content/uploads/2023/10/F46_TechDataSheet_GB-1.pdf) gives for its trowels.
- **Skirting**, read on 12 October 2026: the planner chooses among the lengths MDF and softwood skirting is stocked in, 2.4, 3.05, 4.2 and 4.4 m ([Jewson's 4.2 m primed MDF](https://www.jewson.co.uk/p/sam15-mdf-ogee-skirting-4200-x-94-x-14-5mm-primed-F151494D), [Skirting 4 U's 3.05 and 4.2 m](https://www.skirting4u.co.uk/torus1-mdf-skirting-board), and a 4.4 m board at Travis Perkins), and starts on the one that leaves the fewest joins. Grab adhesive is counted at 6 m of board a cartridge: about 12 m of 6 mm bead from a 350 ml cartridge, on [Sika's Pinkgrip data sheet](https://gbr.sika.com/dam/dms/gb01/y/sika-pinkgrip.pdf) and Evo-Stik's Gripfill page, with two beads along the back of the board. The two beads are BuildBatch's own allowance: no maker's sheet read says how many.
- **Woodwork paint**: 16 m² a litre, the middle of two makers' “up to” figures, [Dulux Trade Satinwood](https://www.duluxtradepaintexpert.co.uk/en/products/dulux-trade-satinwood)'s “up to 17” and [Crown Trade Fastflow Quick Dry Satin](https://product-explorer.specifiedby.com/crown-paints/crown-trade-fastflow-quick-dry-satin)'s “up to 15”, both read on 10 October 2026. An “up to” figure is the most a litre covers, so a tin may cover less on bare or uneven wood; the skirting's height and the architrave's width are from the sizes Travis Perkins' own listing gives, read on 10 October 2026.
- **A patio's bed, joint and sub-base depth**: the figures two makers' laying guides give, [Marshalls' Natural Stone Paving Installation Guide](https://media.marshalls.co.uk/image/upload/v1691058166/Natural-Stone-Paving-Installation-Guidelines.pdf) (issue 5, January 2020) and [Bradstone's “How to lay Concrete Paving”](https://www.bradstone.com/homeowner/blog/how-to-lay-concrete-paving) (10 June 2024), read in full on 10 October 2026. The bed is counted at 40 mm, the top of the 30 to 40 mm Marshalls gives for the bed before the slab is tamped down, so the mortar is bought for the depth it is laid at. The sub-base runs 150 mm past the paving on each edge that is not against a wall, the lower figure of the one maker's guide that gives a margin ([Pavestone's porcelain guide](https://www.pavestone.co.uk/installation/porcelain-installation-guide/): 150 to 200 mm for kerbing or haunching, read on 12 October 2026), and is counted 10% over for what is lost in spreading and for an uneven dig, an allowance of BuildBatch's own.
- **The bed's dry materials**: the dry sand and cement take about a third more room than the finished bed, so the bags are counted on 1.3 times the bed's volume, between the 1.27 of [materialcalculator.co.uk's mortar calculator](https://materialcalculator.co.uk/mortar-calculator) and the 1.33 of [mixdesigncalc.co.uk's](https://mixdesigncalc.co.uk/mortar-mix-calculator-uk/), both read on 11 October 2026. No maker publishes a figure.
- **Packs for a patio and a slab**, read on 9 and 10 October 2026: a bulk bag of sharp sand, ballast or shingle about 0.5 m³, as [M&P Moran](https://www.mpmoran.co.uk/bulk-bag-sharp-sand-100011591)'s pages give it, and a 25 kg bag the same scaled down; a 25 kg bag of cement about 17 litres, by the density figure trade calculators use (no maker's sheet read gives a bag's volume); a bulk bag of MOT Type 1 about 0.38 m³ once compacted, so nothing is added for settlement: an 800 kg bag at about 2.1 tonnes a cubic metre compacted, the middle of the figures suppliers and quarries give (1.9 to 2.3; [Soils & Stone](https://soilsandstone.co.uk/aggregates/sub-base/type-1-sub-base-swh-clause-803-formerly-mot/) says 2.2 “compacted”), read on 12 October 2026, and the same answer as a 0.5 m³ loose bag compacting by the 30% that [Paving Expert](https://www.pavingexpert.com/subbase) and Marshalls give; a tub of slurry primer about 12 m² and a pail of jointing compound about 7 m², in Travis Perkins' own listing. [Sika's FastFix All Weather data sheet](https://irl.sika.com/dms/getdocument.get/553d68c9-e0ca-49d4-9988-805a10a511d8/sika_fastfix_allweather.pdf) (February 2025) is quoted beside the jointing for its own joint.
- **Concrete mixed on site**: the cement, sand and aggregate Tarmac publishes for 2.5 m³ of three mixes, its pages dated 24 November 2020 and read on 9 October 2026: [general purpose](https://tarmac.com/help/what-mix-ratios-of-cement-do-you-recommend-for-general-purpose-concrete), [paving](https://tarmac.com/help/what-mix-ratios-of-cement-do-you-recommend-for-a-paving-mix) and [foundation](https://tarmac.com/help/what-mix-ratios-of-cement-do-you-recommend-for-foundation-concrete).
- **Under a concrete slab**, read on 12 October 2026: a sub-base of 100 mm, a typical depth and not a design ([Heidelberg Materials' guide to a concrete base](https://www.heidelbergmaterials.co.uk/en/ready-mixed-concrete/technical-information/how-to-lay-a-concrete-base) gives “the 100 mm sub base”; its shed-base guide and CEMEX's give 75 mm), laid 75 mm wider than the slab all round for the formwork ([CEMEX's guide to laying concrete](https://www.cemex.co.uk/about-us/media/guides-advice/guide-to-laying-concrete)), with the patio's bag figure and 10%. A damp-proof membrane, and the sheeting that covers new concrete or a patio, are counted in the smallest roll read that covers the job, 50 m² ([Visqueen's 4 m × 12.5 m roll](https://visqueen.com/products/visqueen-high-performance-damp-proof-membrane/)). How the concrete comes when nobody has chosen is not a typical figure but a rule of BuildBatch's own, said to be one on the list: bags of dry mix up to 0.25 m³, mixed on site up to 1 m³, ready-mixed above.
- **Sub-base and gravel on their own**, read on 30 October 2026: the depth each layer starts at, compacted for Type 1 and loose for gravel, the top of the guides' figures so the bags do not run short, except a driveway's Type 1 (below). Type 1 100 mm for a path or a patio ([Marshalls](https://www.marshalls.co.uk/aggregates-and-block/blog/what-sub-base-do-i-need) “Patios, garden paths: 75-100mm”, [Bradstone](https://www.bradstone.com/homeowner/blog/how-to-lay-a-garden-path), [Paving Expert](https://www.pavingexpert.com/subbase)), 100 mm for a shed base ([Heidelberg Materials](https://www.heidelbergmaterials.co.uk/en/ready-mixed-concrete/technical-information/how-to-lay-a-shed-base) “75-100mm of hardcore”, and Travis Perkins' bulk bag coverage “Patios & Shed Bases: 4.5 to 5m2 per bulk bag at 100mm”, a coverage given at that depth rather than a rule; other guides read go lower, CEMEX about 75 mm and Bradstone 50 mm under a slab shed base) and 150 mm for a driveway (Marshalls “Driveways, footpaths: 100-150mm”, [Bradstone](https://www.bradstone.com/homeowner/blog/how-to-lay-braddrive-cobblestone-eco) “a minimum sub-base of 150mm”, Paving Expert's 150 mm for cars and vans, and two merchants' guides: the figure five publishers give, not the top, as one merchant alone, Materials Market, gives 150 to 200 mm, and a typical figure needs two); gravel 50 mm ([Mainland Aggregates](https://www.mainlandaggregates.co.uk/blog/how-to-calculate-the-right-quantity-of-aggregates-for-your-next-job.html) “Paths & driveways: 50mm”, [Decorative Aggregates](https://decorativeaggregates.com/pages/gravel-calculator), [Breedon](https://www.breedon-special-aggregates.co.uk/faq/) 40 to 50 mm). Type 1 is spread about 1.3 times as deep as it ends up (Marshalls “multiply the volume by 1.3”, Paving Expert “around 30%”). Gravel weighs 1.6 to 1.8 t a cubic metre loose, and 1.8 t, the top, is used, so a load ordered by the tonne is not short (Mainland Aggregates' quantities page “Gravel: 1.6–1.8 t/m³”; [Mainland Aggregates](https://www.mainlandaggregates.co.uk/20mm-gravel-shingle.html) “Approx 1.7 tonnes”, Breedon's 12 m² a tonne at 50 mm, [M P Moran](https://www.mpmoran.co.uk/bulk-bag-pea-shingle-20mm-approximately-0-5-cubic-metre-800-850kg-100011592)'s 800 to 850 kg in 0.5 m³). A load of Type 1 by the tonne is worked at 2.3 t a cubic metre, the top of the 1.9 to 2.3 t read for the sub-base. A 20 kg bag of decorative chippings holds about 0.0117 m³, its 20 kg times what a tonne of gravel covers (Mainland Aggregates' 850 kg bag “will cover approx 10sqm at 50mm depth”, Breedon's tonne about 12 m² at 50 mm; the smaller); a maker's figure of 3 bags a square metre at 50 mm (Heidelberg Materials) names no bag weight and is not used and a bulk bag about 0.48 m³ (Breedon's 800 kg bag). A geotextile under Type 1, counted only on soft or clay ground, is lapped 900 mm at each side join and roll end ([Don & Low](https://www.donlow.co.uk/media/uploads_file/2018/04/26/p1cc16kb9l8j7179k1njf71u1e5g4.pdf) 600 to 900 mm where the ground's CBR is 1 to 2, 900 mm or sewn below that and at all roll ends, 300 to 450 mm on firm ground; [Terram](https://terram.com/faqs/) 300 mm to 1 m by the ground; [Geoworks](https://geoworks.eco/services/knowledge-base/installation-guides/multitrack-fastrack-and-terratrack-installation-guide) at least 300 mm side by side and 600 mm length on length; the top is used, so the rolls are not short), counted in rolls 4.5 m wide and 11 m long, a typical size of the rolls on sale for a driveway, the smaller of the 4.5 m rolls so the count is not short (Wrekin's FasTrack 609 data sheet, a mini pack of “4.5m x 11m” and rolls of 4.5 m × 100 m; Don & Low's Lotrak 100 data sheet, 4.5 m wide and 100 m long; Materials Market's own 4.5 m × 11 m driveway fabric and Travis Perkins' Wrekin minipack of 4.5 m × 11.1 m, both listed on 29 October 2026), and a weed-control fabric under gravel 100 mm ([Geoworks](https://geoworks.eco/services/knowledge-base/installation-guides/weedshield-and-fastrack-shield-installation-instructions), Product That Works). The 10% added to each layer and the 10 bulk bags above which an amount is called large are BuildBatch's own figures.
- **Plasterboard**, read on 12 October 2026: about 40 screws a 1.2 m × 2.4 m board, in boxes of 1,000, BuildBatch's own sum from the fixing centres for a ceiling in [Siniat's Drywall Manual](https://media.siniat.co.uk/pi859849/original/100167024/siniat_drywall-manual-bk5-floorsceilings-v2.0.0-june25.pdf) (a wall takes fewer); paper joint tape in 150 m rolls at about 3.6 m of joint a board; and finish plaster at about 10 m² from a 25 kg bag at 2 mm, as [Jewson's page for Thistle MultiFinish](https://www.jewson.co.uk/p/british-gypsum-thistle-multifinish-finishing-plaster-25kg-PRTLETMF) gives it.
- **Loft rolls by thickness**: the square metres one roll of [Knauf Loft Roll 44 Combi-Cut](https://www.knaufinsulation.co.uk/products/loft-roll-44) covers at 100, 150, 170 and 200 mm (13.89, 9.18, 8.01 and 6.84 m²), as Materials Market's and Travis Perkins' own listings named it on 9 October 2026.
- **Carpet and sheet vinyl roll widths**, used when no width is given: carpet in 4 m and 5 m, the common widths [Wilton Carpets](https://www.wiltoncarpets.co.uk/carpet-measuring-made-simple/) gives for its tufted carpet (read on 30 September 2026), and sheet vinyl in 2, 3 and 4 m, the three standard widths in Frankly Flooring's buying guide (read on 6 October 2026). The planner takes the width that needs least roll for the room and says the shop may not sell it.

The tables these come from, with each figure as its page writes it, are kept with the site's code. A typical figure is not a recommendation, and the instructions on the product you buy come first.

## Typical prices

Where no partner shop prices a material, the planner asks you its price and gives a typical range as the hint. Each range is the lowest and the highest that at least two publishers printed. It is never a shop's price, and never added into a cost until you type a price.

- **Matt emulsion for walls and ceilings**: typical £4.80 to £12 a litre; the publishers do not say whether VAT is included. From [BestBuilders](https://www.bestbuilders.co.uk/costs/house-painting-cost-by-room) (£6.40 to £9.60, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/painting-a-bedroom) (£5 to £8, read 12 October 2026), [Trade2Base](https://www.trade2base.com/blog/painting-decorating-pricing-guide-uk) (£5 to £9, read 12 October 2026) and [UK Calculator](https://ukcalculator.com/blog/paint-calculator-guide.html) (£4.80 to £12, read 12 October 2026).
- **Emulsion in a mixed colour**: typical £8 to £12.80 a litre; the publishers do not say whether VAT is included. From [FacadeColorizer](https://facadecolorizer.com/en/blog/crown-paint-vs-dulux-interior-comparison-uk-2026) (£8.80 to £12.80, read 17 October 2026) and [UK Calculator](https://ukcalculator.com/blog/paint-calculator-guide.html) (£8 to £12, read 17 October 2026).
- **Designer emulsion**: typical £14 to £22.40 a litre; the publishers do not say whether VAT is included. From [BestBuilders](https://www.bestbuilders.co.uk/costs/house-painting-cost-by-room) (£15 to £19.60, read 17 October 2026), [FacadeColorizer](https://facadecolorizer.com/en/blog/crown-paint-vs-dulux-interior-comparison-uk-2026) (£22.40, read 17 October 2026) and [UK Calculator](https://ukcalculator.com/blog/paint-calculator-guide.html) (£14 to £22, read 17 October 2026).
- **Satinwood or gloss for woodwork**: typical £7.20 to £26.67 a litre; the publishers do not say whether VAT is included. From [MyJobQuote](https://www.myjobquote.co.uk/costs/painting-a-bedroom) (£8 to £25, read 12 October 2026), [Trade2Base](https://www.trade2base.com/blog/painting-decorating-pricing-guide-uk) (£7.20 to £12, read 12 October 2026) and [UK Calculator](https://ukcalculator.com/blog/paint-calculator-guide.html) (£10.67 to £26.67, read 12 October 2026).
- **Wall tiles**: typical £10 to £50 a m²; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/bathroom-tiling-cost-2026-wall-floor) (£15 to £40, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-bathroom) (£12 to £50, read 12 October 2026) and [Pricing Penguin](https://www.pricingpenguin.co.uk/cost-guides/tiling) (£10 to £20, read 12 October 2026).
- **Floor tiles**: typical £15 to £80 a m²; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/bathroom-tiling-cost-2026-wall-floor) (£15 to £80, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-floor) (£15 to £30, read 12 October 2026) and [Pricing Penguin](https://www.pricingpenguin.co.uk/cost-guides/tiling) (£15 to £30, read 12 October 2026).
- **Tile adhesive**: typical £15 to £30 a bag; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/bathroom-tiling-cost-2026-wall-floor) (£15 to £30, read 12 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-bathroom) (£20, read 12 October 2026).
- **Tile grout**: typical £10 to £25 a bag; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/bathroom-tiling-cost-2026-wall-floor) (£10 to £25, read 12 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-bathroom) (£17, read 12 October 2026).
- **Laminate flooring**: typical £6 to £35 a m²; some of the publishers include VAT and the others do not say. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/flooring-installation-cost-uk-2026) (£12 to £35, read 12 October 2026), [Fantastic Services](https://www.fantasticservices.com/cost-guides/flooring/laminate-floor-installation/) (£8 to £30, read 12 October 2026), [Less](https://less.co.uk/home-improvements/flooring/cost) (£10 to £25, read 12 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/laying-laminate-floor) (£6 to £20, read 12 October 2026).
- **Engineered wood flooring**: typical £25 to £90 a m²; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/wood-floor-cost-uk-engineered-solid) (£30 to £90, read 12 October 2026), [Less](https://less.co.uk/home-improvements/flooring/cost) (£25 to £55, read 12 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/new-flooring) (£40 to £90, read 12 October 2026).
- **Vinyl or LVT planks**: typical £15 to £60 a m²; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/flooring-installation-cost-uk-2026) (£25 to £60, read 12 October 2026), [Less](https://less.co.uk/home-improvements/flooring/cost) (£15 to £35, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/new-flooring) (£20 to £60, read 12 October 2026), Tile Mountain (£15 to £40, read 12 October 2026) and [Trade2Base](https://www.trade2base.com/blog/lvt-flooring-costs-uk) (£15 to £40, read 12 October 2026).
- **Underlay for laminate, wood or vinyl planks**: typical £1 to £10 a m²; some of the publishers include VAT and the others do not say. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/flooring-installation-cost-uk-2026) (£2 to £5, read 12 October 2026), [Fantastic Services](https://www.fantasticservices.com/cost-guides/flooring/laminate-floor-installation/) (£2 to £8, read 12 October 2026), [Less](https://less.co.uk/home-improvements/flooring/cost) (£3 to £10, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/laying-laminate-floor) (£1 to £7, read 12 October 2026) and [Trade2Base](https://www.trade2base.com/blog/flooring-installation-pricing-guide-uk) (£2 to £10, read 12 October 2026).
- **Carpet**: typical £6 to £60 a m²; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/flooring-installation-cost-uk-2026) (£10 to £40, read 12 October 2026), [Less](https://less.co.uk/home-improvements/flooring/cost) (£8 to £30, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/new-flooring) (£6 to £60, read 12 October 2026) and [Trade2Base](https://www.trade2base.com/blog/flooring-installation-costs-uk) (£8 to £40, read 12 October 2026).
- **Carpet underlay**: typical £1.50 to £12 a m²; the publishers do not say whether VAT is included. From [Best4Flooring](https://www.best4flooring.co.uk/blog/how-much-does-carpet-fitting-cost/) (£8 to £12, read 12 October 2026), [BookaBuilderUK](https://www.bookabuilderuk.com/blog/flooring-installation-cost-uk-2026) (£4 to £10, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/cost-of-laying-carpet) (£1.50 to £8, read 12 October 2026) and [Trade2Base](https://www.trade2base.com/blog/flooring-installation-costs-uk) (£2 to £8, read 12 October 2026).
- **Sheet vinyl**: typical £7 to £40 a m²; the publishers do not say whether VAT is included. From [MyJobQuote](https://www.myjobquote.co.uk/costs/vinyl-flooring-costs) (£7 to £15, read 12 October 2026) and [Tapi](https://www.tapi.co.uk/vinyl) (£10 to £40, read 12 October 2026).
- **Wallpaper**: typical £5 to £100 a roll; the publishers do not say whether VAT is included. From [BestBuilders](https://www.bestbuilders.co.uk/costs/wallpapering-cost-uk) (£25 to £100, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/hang-bedroom-wallpaper) (£5 to £50, read 12 October 2026), [Novitas Decorators](https://www.novitasdecorators.co.uk/how-much-does-wallpapering-cost/) (from £15, read 12 October 2026), [squote](https://squote.app/knowledge/costs/wallpapering-pricing-guide) (£8 to £70, read 12 October 2026) and [UK Calculator](https://ukcalculator.com/blog/wallpaper-calculator-guide.html) (£5 to £40, read 12 October 2026).
- **Lining paper**: typical £3 to £12 a roll; the publishers do not say whether VAT is included. From [MyJobQuote](https://www.myjobquote.co.uk/costs/hang-bedroom-wallpaper) (£3 to £10, read 12 October 2026) and [squote](https://squote.app/knowledge/costs/wallpapering-pricing-guide) (£4 to £12, read 12 October 2026).
- **Skirting board**: typical £2 to £12 a metre; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/skirting-boards-cost-2026-mdf-timber) (£3 to £12, read 12 October 2026) and [squote](https://squote.app/knowledge/costs/skirting-board-fitting-pricing-guide) (£2 to £10, read 12 October 2026).
- **Plasterboard**: typical £6 to £18 a board; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/plasterboard-thickness-explained) (£10 to £15, read 12 October 2026), [squote](https://squote.app/knowledge/costs/skim-coat-pricing-guide) (£10 to £18, read 12 October 2026) and [Trade2Base](https://www.trade2base.com/blog/plasterer-pricing-guide-uk) (£6 to £9, read 12 October 2026).
- **Loft insulation roll**: typical £15 to £40 a roll; the publishers do not say whether VAT is included. From [BookaBuilderUK](https://www.bookabuilderuk.com/blog/loft-boarding-insulation-cost-uk-2026) (£15 to £25, read 12 October 2026) and [The Eco Experts](https://www.theecoexperts.co.uk/insulation/loft-insulation-costs) (£25 to £40, read 12 October 2026).
- **Paving slabs**: typical £15 to £55 a m²; the publishers do not say whether VAT is included. From [BestBuilders](https://www.bestbuilders.co.uk/costs/patio-cost-uk-patio-installation-cost) (£20 to £40, read 12 October 2026), [MyJobQuote](https://www.myjobquote.co.uk/costs/patio-design-installation-cost) (£20 to £55, read 12 October 2026) and [Trade2Base](https://www.trade2base.com/blog/patio-driveway-pricing-guide-uk) (£15 to £25, read 12 October 2026).
- **Ready-mixed concrete**: typical £95 to £170 a m³; the publishers do not say whether VAT is included. From [Less](https://less.co.uk/home-improvements/concrete/cost) (£105 to £170, read 13 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/concrete-shed-base) (£95 to £145, read 13 October 2026).
- **Bagged concrete mix**: typical £4 to £14 a bag; the publishers do not say whether VAT is included. From [Less](https://less.co.uk/home-improvements/concrete/cost) (£4 to £6, read 13 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/pouring-concrete) (£6 to £14, read 13 October 2026).
- **Finish plaster**: typical £8 to £15 a bag; the publishers do not say whether VAT is included. From [MyJobQuote](https://www.myjobquote.co.uk/costs/gypsum-plaster) (£10 to £15, read 13 October 2026), [squote](https://squote.app/knowledge/costs/skim-coat-pricing-guide) (£8 to £12, read 13 October 2026) and [Trade2Base](https://www.trade2base.com/blog/plasterer-pricing-guide-uk) (£10 to £13, read 13 October 2026).

## Typical pack sizes

Before you choose a product, the planner offers these sizes as one tap each, and says they are typical. Each is printed by two publishers, named here with the page and the day it was read. The pack you buy says its own, and its figure comes first.

- **A pack of laminate**: 1.835 m². From Quick-Step (“Impressive, Ivory oak (IM8258)”, read 17 October 2026) and Travis Perkins' product feed (Awin), priced 15 October 2026 (“Quick-Step Impressive Classic Oak Beige Laminate Flooring 1380mm x 190mm x 8mm Pack Size 1.835m2”, read 17 October 2026).
- **A pack of laminate**: 2.131 m². From Kellars (“Forma Laminate product guide (Forma\_section\_V5\_noprice, August 2023), "Advanced - 8mm Thickness"”, read 19 October 2026) and Howarth Timber (“Forma Advanced Laminate Flooring Century Oak Grey 1380 x 193 x 8mm (2.131m2)”, read 17 October 2026).
- **A laminate plank**: 1,288 × 195 mm, until a product is chosen. From Kronospan (“K057 Clearwater Oak, Super Natural”, read 17 October 2026) and Travis Perkins' product feed (Awin), priced 15 October 2026 (“Kronospan Harlech Oak Laminate Flooring 1288mm x 195mm x 8mm 2.26m2”, read 17 October 2026).
- **A roll of floor underlay**: 10 m². From Interfloor (“Duralay Timbermate Excel DIY”, read 12 October 2026) and Online Carpets (“Oceanic 3mm Laminate Underlay”, read 18 October 2026).
- **A roll of floor underlay**: 15 m². From Interfloor (“Duralay Timbermate Excel”, read 12 October 2026) and Flooring Surgeons (“Silver Grade 3mm Foam Underlay”, read 18 October 2026).
- **A sheet of A142 mesh**: 4.8 × 2.4 m, lapped 600 mm, the larger of the two merchants' laps. From Beesley & Fildes (“A142M Reinforcement Mesh 2Mtr x 3.6Mtr x 6mm Dia Bar”, read 17 October 2026) and Materials Market (“6mm A142 High Tensile Steel Reinforcement Mesh Sheet 2400mm x 4800mm”, read 17 October 2026).

## How long a job takes, and the waits between steps

A job's time is a tradesperson's typical time, from two publishers. A wait between two steps is the maker's own figure for its own product. Neither is our estimate of how long you will take.

- **Tiling a floor**: A tiler lays 8 to 12 m² of floor tiles a day, and 8 to 14 m² of large porcelain tiles. From [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-floor) (a tiler laying 8 to 12 m² of floor a day; read 3 October 2026) and [Trade2Base](https://www.trade2base.com/blog/tiling-pricing-guide-uk) (large-format porcelain floor tiles (600 × 600 mm and over): 8 to 14 m² a day, for a sole tiler; read 18 October 2026). Grout after 24 hours on floors, for a standard-set adhesive: [ARDEX](https://ardex.co.uk/product/ardex-x-7/) (read 18 October 2026).
- **Laying a laminate floor**: A fitter takes one to two days for a small room of 10 to 15 m², and up to three days for a bigger one. From [MyJobQuote](https://www.myjobquote.co.uk/costs/laying-laminate-floor) (laminate fitting time: "Small room (10-15m²): 1-2 days" (page updated 9 July 2026); read 19 October 2026) and [BookaBuilderUK](https://www.bookabuilderuk.com/blog/flooring-installation-cost-uk-2026) (timeframes for flooring installation: "Laminate. 1 to 3 days depending on size"; read 19 October 2026). EGGER's laminate: at least 48 hours, in a room at 18 °C or more: [EGGER](https://www.egger.com/en/blog/how-to-lay-laminate-flooring?country=GB) (read 19 October 2026).
- **Painting a room**: A decorator takes about 1 day for a small bedroom and 2 days for a medium room. From [MyJobQuote](https://www.myjobquote.co.uk/costs/painting-a-bedroom) (a small bedroom of 10 to 12 m², one day; read 17 October 2026) and [Which?](https://www.which.co.uk/reviews/finding-a-tradesperson/article/how-much-do-painters-and-decorators-cost-a01St5l9H20e) (a medium room, 3.3 m by 3 m, about two days; read 3 October 2026). Matt Vinyl: recoat after 4 hours at 20 °C: [Crown Trade](https://professional.crownpaints.com//content/uploads/product-sync-resources/qLpFdovwwTGqdh8d.pdf) (read 5 October 2026). 1 to 4 hours between coats: [Ten makers of matt emulsion](https://buildbatch.co.uk/guides/how-long-between-coats-of-paint/) (read 29 September 2026).
- **Laying a patio**: A team takes about two days for a 10 m² patio and three to five days for a 20 m² one, from digging out to pointing. From [MyJobQuote](https://www.myjobquote.co.uk/costs/patio-design-installation-cost) (timescales for laying a patio: "Small (≈10m²)" about 2 days, "Medium (≈20m²)" about 3 days (page updated 14 September 2026); read 19 October 2026) and [BookaBuilderUK](https://www.bookabuilderuk.com/blog/patio-replacement-cost-uk-2026) ("A standard 20m² patio typically takes 3 to 5 days for a two person team, assuming average conditions and good access"; read 19 October 2026). Weatherpoint 365: walk on the slabs at once, but keep off the joints until they are fully cured, after 30 days: [Marshalls](https://media.marshalls.co.uk/image/upload/v1742572918/weatherpoint-365-installation-guide.pdf) (read 19 October 2026).
- **Tiling walls**: A tiler lays 6 to 10 m² of standard ceramic wall tiles a day, and takes about three days to tile a medium bathroom's walls. From [Trade2Base](https://www.trade2base.com/blog/tiling-pricing-guide-uk) (standard ceramic wall tiles (300 × 300 mm): 6 to 10 m² a day, for a sole tiler; read 18 October 2026) and [MyJobQuote](https://www.myjobquote.co.uk/costs/tiling-a-bathroom) (fully tiling the walls of a medium-sized bathroom: 3 days; read 18 October 2026). Grout after 6 to 8 hours on walls, for a standard-set adhesive: [BAL](https://www.bal-adhesives.com/product/bal-flex-one/) (read 18 October 2026) and [ARDEX](https://ardex.co.uk/product/ardex-x-7/) (read 18 October 2026).
