How much MOT Type 1 do I need? A table by area
A 3 × 6 m area at 150 mm takes 8 bulk bags of Type 1, about 6.4 t. Typical figures.
Work it out for your room, starting from this area's sizes.
| Area | In feet | Area | At 150 mm, a driveway | What the bags weigh | At 100 mm, a path or a shed base | What the bags weigh | Your area |
|---|---|---|---|---|---|---|---|
| 1 × 2 m | 3.3 × 6.6 ft | 2 m² | 1 bulk bag | 800 kg | 19 bags of 25 kg | 475 kg | Open 1 × 2 m in the planner |
| 1 × 3 m | 3.3 × 9.8 ft | 3 m² | 2 bulk bags | 1.6 t | 1 bulk bag | 800 kg | Open 1 × 3 m in the planner |
| 1 × 5 m | 3.3 × 16.4 ft | 5 m² | 3 bulk bags | 2.4 t | 2 bulk bags | 1.6 t | Open 1 × 5 m in the planner |
| 2 × 2 m | 6.6 × 6.6 ft | 4 m² | 2 bulk bags | 1.6 t | 2 bulk bags | 1.6 t | Open 2 × 2 m in the planner |
| 2 × 3 m | 6.6 × 9.8 ft | 6 m² | 3 bulk bags | 2.4 t | 2 bulk bags | 1.6 t | Open 2 × 3 m in the planner |
| 3 × 4 m | 9.8 × 13.1 ft | 12 m² | 6 bulk bags | 4.8 t | 4 bulk bags | 3.2 t | Open 3 × 4 m in the planner |
| 3 × 6 m | 9.8 × 19.7 ft | 18 m² | 8 bulk bags | 6.4 t | 6 bulk bags | 4.8 t | Open 3 × 6 m in the planner |
| 4 × 5 m | 13.1 × 16.4 ft | 20 m² | 9 bulk bags | 7.2 t | 6 bulk bags | 4.8 t | Open 4 × 5 m in the planner |
| 5 × 6 m | 16.4 × 19.7 ft | 30 m² | 14 bulk bags | 11.2 t | 9 bulk bags | 7.2 t | Open 5 × 6 m in the planner |
| 5 × 10 m | 16.4 × 32.8 ft | 50 m² | 22 bulk bags | 17.6 t | 15 bulk bags | 12 t | Open 5 × 10 m in the planner |
A 3 × 6 m area (9.8 × 19.7 ft) is 18 m²: 150 mm of Type 1, compacted, is 8 bulk bags of about 0.38 m³, about 6.4 t of bags (the amount itself about 6.24 t at a typical 2.1 t a cubic metre), with 10% for spreading. At 100 mm, for a path or a shed base, the same area takes 6 bulk bags, about 4.8 t of bags. The depths, what a bag holds and what a cubic metre weighs are typical figures, not a product’s, each named on its line in the planner; the 10% is BuildBatch’s own. The depth is the ground’s and the use’s to decide: use your own.
Each row is the planner’s answer for that area, worked out when this page was built. The link at the end of a row opens the planner with that area filled in, to change the measurements and the product figures.
For the 5 × 6 m and 5 × 10 m areas, the planner warns: More than 10 bulk bags of Type 1 is a large amount: BuildBatch's own threshold, not a maker's. It is also sold as a loose load by the tonne, tipped from a lorry: worked at 2.3 t a cubic metre, the top of the typical weights, so the load is not short. Ask the supplier about the access, the smallest load they deliver and whether any left over can go back.
What it costs today
A 3 × 6 m area: £470 of materials at Materials Market's prices of 6 November 2026, including VAT, before delivery.
This is a material quantity, not a design: the depth the ground and the use need, the levels, the falls and the drainage are for a designer, the product's instructions or building control.
The depths are typical figures for what the Type 1 is under, compacted: 100 mm for a path or a shed base, the top of the figures in makers' and suppliers' guides, so the bags do not run short, and 150 mm for a driveway, the figure five of them give; one supplier gives 150 to 200 mm. The ground and the use decide the real depth: enter yours on the MOT Type 1 calculator.
A bulk bag of Type 1 makes about 0.38 m³ once compacted and a 25 kg bag about 0.012 m³, typical figures named on the planner's line, so nothing is added for settling. Where 20 bags of 25 kg or fewer cover it, the planner counts the bags, a rule of its own; bulk bags above.
What the bags weigh is their own weight; at a typical 2.1 t a cubic metre once compacted, the amount itself weighs a little less or more. Spread it about 1.3 times as deep as it ends up, and compact it in layers of no more than 75 mm. How much Type 1 and gravel do I need? works through the 6 × 3 m driveway.
What the table assumes
Each area is a rectangle.
- Doors and windows are not used for a sub-base or gravel.
- The depths, what a bag holds and what a cubic metre weighs are typical figures, not any product's own, each named with its sources on its line; the 10% is BuildBatch's own allowance.
- The weights are what the bags weigh, and what the amount weighs at a typical density (2.1 t a cubic metre for Type 1 once compacted, 1.8 t for gravel loose): the bags are what to buy. A load by the tonne is said at the top of the weights read, 2.3 t for Type 1, so it is not short.
- Each layer is rounded once, at the end, up to whole bags of the pack its own amount takes: 25 kg bags where 20 or fewer cover it, bulk bags above. Working uses unrounded figures.
How this table was made
It was worked out when this page was built, by the same room planner and formulas as the editable list: each row is one area sent through the planner, once at each depth. The sizes are round examples. The 10% is the planner’s own; the depths, what a bag makes once compacted and what Type 1 weighs are typical figures whose sources it names.
Automated tests compare every cell with the planner. The table uses no price: the cost under the answer is one partner shop’s own prices, on the day they were read, shown for 14 days and then not at all.
Before you use it
Measure the area to be laid, and add the width the sub-base runs past any edging. Check the figures against the area, and follow each product's own instructions: they decide the depth, what a bag holds and how it is laid and compacted.