How much MOT Type 1 and gravel do I need?

5 min read · Updated 30 October 2026

A 6 × 3 m gravel driveway takes 8 bulk bags of MOT Type 1 at 150 mm compacted and 2 bulk bags of 20 mm gravel at 50 mm on top. A 5 × 1 m path takes 2 bulk bags of Type 1 at 100 mm and 19 bags of 25 kg of gravel.

Built with AI tools; not yet checked by a tradesperson.

Read here; this page sends and keeps nothing.

Work out the sub-base and the gravel for this area, then change it to yours

A section through the layers, to scale: 50 mm of loose gravel on 150 mm of compacted Type 1, over a membrane on the ground: 200 mm in all below the finished surface.Gravel, loose · 50 mmType 1, compacted · 150 mmMembraneGround200 mm below the finished surface
50 mm of gravel over 150 mm of compacted Type 1, the typical depths for a driveway: dig 200 mm below the finished surface. The Type 1 is spread about 195 mm deep before it is compacted.

The sum

  • Type 1 = the area × the depth once compacted, plus 10% for spreading and an uneven dig, ÷ about 0.38 m³ a bulk bag (or 0.012 m³ a 25 kg bag). The bag’s figure is for the Type 1 compacted, so nothing more is added for settling.
  • Gravel = the area × the depth, loose, plus 10% for spreading and raking level, ÷ about 0.5 m³ a bulk bag (or 0.015 m³ a 25 kg bag).
  • Spread the Type 1 deeper than it ends up: about 1.3 times, so 150 mm compacted is about 195 mm spread, in layers of no more than 75 mm.

What a bag holds and what a cubic metre weighs are typical figures; the 10% is BuildBatch’s own (sources).

Worked example

A driveway 6 m × 3 m, gravel over Type 1 at the typical depths for a driveway.

Working Figure Result
Area 6 m × 3 m 18 m²
Type 1 at 150 mm, compacted 18 × 150 ÷ 1,000 2.7 m³
With 10% 2.7 × 1.1 = 2.97 m³ ÷ about 0.38 m³ a bulk bag 8 bulk bags (or 248 bags of 25 kg)
What the Type 1 weighs 8 bags of about 800 kg; 2.97 m³ at about 2.1 t a cubic metre about 6.4 t; about 6.2 t
Gravel at 50 mm, loose 18 × 50 ÷ 1,000 0.9 m³
With 10% 0.9 × 1.1 = 0.99 m³ ÷ about 0.5 m³ a bulk bag 2 bulk bags
What the gravel weighs 2 bags of about 825 kg; 0.99 m³ at about 1.8 t a cubic metre about 1.65 t; about 1.78 t

The two weights of each layer differ because a bag is sold by weight and the amount is worked by volume. The bags are what to buy.

Depth by use

The depth each layer starts at in the planner, from the figures in makers’ and suppliers’ guides: the top of them, so the bags do not run short, except a driveway’s Type 1, where 150 mm is the figure five of them give and one supplier gives 150 to 200 mm:

Use Type 1, compacted Gravel, loose
Path 100 mm 50 mm
Driveway 150 mm 50 mm
Shed base 100 mm 50 mm
Border 100 mm, if any 50 mm

A shed base is usually Type 1 alone, under slabs or concrete; a border is usually gravel alone, on a weed-control fabric.

Measuring it

Measure the length and the width of the area to be laid. An L-shaped drive is two rectangles added together: see the area of an L-shape. A curved edge is measured at its widest, which leaves a little over. Take off nothing for a drain cover until its size is known.

What changes it

  • Soft or clay ground. Lay more Type 1 and a geotextile under it. One supplier gives 150 to 200 mm for a driveway.
  • Bags, not bulk bags. Where 20 bags of 25 kg or fewer cover a layer, the planner counts the bags; above that, bulk bags. The driveway’s Type 1 would be 248 bags.
  • Decorative chippings. A 20 kg bag holds about 0.0117 m³, so a 4 × 2 m border at 50 mm takes 38 of them. Stones differ: by one maker’s figures a bag of slate or cobbles covers more ground than a bag of chippings, so read the bag.
  • A large amount. More than 10 bulk bags is also sold as a loose load by the tonne, tipped from a lorry. The planner works its tonnes at the top of the typical weights, 2.3 t a cubic metre for Type 1 and 1.8 t for gravel, so the load is not short.

What it costs to have a gravel driveway laid, and tables of Type 1 and gravel by area.

Sources

  • Marshalls: What Sub-Base Do I Need for My Project?, read 30 October 2026: 75 to 100 mm for patios and garden paths, 100 to 150 mm for driveways, and 1.3 for compaction.
  • Paving Expert: sub-bases, read 30 October 2026: 150 mm for cars and vans, 100 mm for domestic paths and patios, and compaction of around 30%.
  • Bradstone: How to Lay a Garden Path, read 30 October 2026: a 100 mm sub-base in two 50 mm layers.
  • Mainland Aggregates: How to calculate the right quantity of aggregates, read 30 October 2026: gravel 50 mm on paths and driveways, 30 to 50 mm in decorative areas, and 1.6 to 1.8 t a cubic metre.
  • Breedon: FAQ, read 30 October 2026: gravel at 40 to 50 mm, and a tonne covering about 12 m² at 50 mm.
  • What a bulk bag and a 25 kg bag hold, what Type 1 weighs in place, and the laps of a membrane: typical figures from makers and suppliers, read 10 to 30 October 2026, each named on the sources page.
  • The 10% on each layer and the 10 bulk bags above which an amount is called large are BuildBatch’s own figures.

Questions

How much MOT Type 1 do I need for a driveway?

For a 6 × 3 m driveway at 150 mm compacted, 2.7 m³, 2.97 m³ with 10% for spreading: 8 bulk bags of about 800 kg, about 6.4 t of bags. At 100 mm, for a path or a shed base, the same area takes 6.

How deep should gravel be?

About 50 mm, laid loose, for a path, a border or a driveway: the top of the 30 to 50 mm the guides give. Larger stones, such as pebbles, are laid deeper: the supplier's own figure for the stone comes first.

How many square metres does a bulk bag of gravel cover?

About 10 m² at 50 mm, from a bag of about 0.5 m³. A bulk bag of Type 1 covers about 3.8 m² at 100 mm once compacted.

How much does a tonne of gravel cover?

About 11.1 m² at 50 mm, at 1.8 t a cubic metre loose, the top of the typical figures read (1.6 to 1.8 t), so a load ordered by the tonne is not short. Wet gravel weighs more and covers less a tonne.

What changed: New: the sum for Type 1 and gravel, the depth for a path, a driveway, a shed base or a border, and what the bags weigh.