Gravel calculator

Gravel or chippings in bags, and the weight.

An example driveway

A 6 × 3 m driveway, gravel

Gravel
2 bulk bags. about 1.65 t · 0.99 m³ needed0.99 m³ needed of 1 m³ bought: 0.01 m³ left over. Another pack is needed above 1 m³. One pack fewer, 0.5 m³, would be 0.49 m³ short.. 0.01 m³ left over

Built with AI tools; not yet checked by a tradesperson.

Gravel or decorative chippings for a path, a border or a driveway, in bulk bags or bags, with its weight.

Want a figure before you measure? See the bags of gravel an area takes, by its size.

Having it done, laying a gravel driveway: labour only, £300 to £800 per job; with materials, £40 to £100 per m² and £1,200 to £2,500 per job; materials not stated, £40 to £100 per m². These are published UK figures, each its publisher's own, and not a quote: every figure, its source and the sum for a room: laying a gravel driveway.

How the number is worked out, a worked example and questions

How the number is worked out

  1. Measure the area. Its length and width, or its area, or draw its shape. Gravel alone is the planner's start on this page; gravel over a Type 1 sub-base, for a driveway or a path, is one tap away.
  2. The depth. Gravel starts at 50 mm for a path, a border or a driveway, the typical depth makers' and suppliers' guides give, laid loose. Larger stones go deeper: type the depth decided for your job and that is used instead.
  3. The volume and the bags. The area times the depth is the volume, loose and not compacted; 10% is added for spreading and raking level, BuildBatch's own figure. A bulk bag of 20 mm gravel holds about 0.5 m³ and a 25 kg bag about 0.015 m³; decorative chippings come in 20 kg bags of about 0.0117 m³ and bulk bags of about 0.48 m³. Until you choose, the count is in bags where 20 of them or fewer cover it, and in bulk bags above that.
  4. What it weighs. The bags at their own weight, and the amount at 1.8 t a cubic metre, loose, the top of the typical figures read. A weed-control fabric under gravel on bare soil, and edging to hold it, are checks with their size beside them.

This is a material quantity, not a design. A driveway's gravel goes over a compacted sub-base, and the depth, the levels and the drainage are a designer's or the product's instructions.

Where the figures come from. The 10% is BuildBatch's own allowance, not a maker's figure. The depths, what a bag holds, what gravel weighs and the fabric's lap are typical figures, read on 10 and 30 October 2026, each with the page it was read on, on the sources page, with the other typical figures.

A worked example

A gravel border 4 m × 2 m is 8 m². Gravel at 50 mm, the typical depth for a border, laid loose on a weed-control fabric, with 10% for spreading and raking level. The bags are counted from typical figures, not a product's own: what the bag you buy says comes first.

Typical depth and bags; the 10% is BuildBatch's own
WorkingFigureResult
Border area4 m × 2 m8 m²
Gravel, loose, at the typical depth for a border50 mm0.4 m³
With the allowance for spreading and raking level10%0.44 m³
In 25 kg bags of about 0.015 m³: more than 20, so a bulk bag is counted29.33333330 bags
In bulk bags of about 0.5 m³, rounded up0.881 bulk bag
What the bulk bag weighs825 kg825 kg
What 0.44 m³ weighs at a typical figure for gravel, loose1.8 t a cubic metre792 kg
Decorative chippings in 20 kg bags of about 0.0117 m³0.0117 m³38 bags

The bulk bag holds a little more than the border needs, and 30 bags of 25 kg would weigh about 750 kg, carried one at a time. Chippings in 20 kg bags hold less a bag than 20 mm gravel, so more bags are counted. Stones differ: by one maker's figures a bag of slate or cobbles covers more ground than a bag of chippings, and the bag says what it covers.

Work it out for your room, starting from the example border's sizes.

Stop and check first

  • A driveway needs a sub-base. Gravel on a driveway is laid over compacted Type 1, about 150 mm of it: choose gravel over Type 1 and both layers are counted, or see the MOT Type 1 calculator.
  • Deeper for bigger stones. 50 mm suits gravel and chippings up to about 20 mm; larger pebbles are laid deeper. Too deep and loose gravel is hard to walk and drive on.
  • A fabric and an edge. On bare soil, a weed-control fabric lapped at its joins keeps weeds down, and edging along the free sides keeps the gravel in its place: both are checks on the list, with their size.
  • The stone and the colour. Decorative chippings are a matter of taste: buy them all at once, as colour can vary between loads.

Questions

How much gravel do I need for a 4 m by 2 m border?

1 bulk bag at 50 mm, with 10% for spreading: 0.44 m³.

How deep should gravel be?

The guides read give about 50 mm for a path, a border or a driveway, and some give 30 to 50 mm for a decorative area; the calculator starts at 50 mm, the top of those, so the bags do not run short. Larger stones are laid deeper.

How many square metres does a bulk bag of gravel cover?

About 10 m² at 50 mm, from a bag of about 0.5 m³: a typical figure. A bag of decorative chippings covers a little less. What the bag says on its own label comes first.

How much does a cubic metre of gravel weigh?

The figures read give 1.6 to 1.8 t loose. The calculator uses 1.8 t, the top of them, so a load ordered by the tonne is not short. Wet gravel weighs more.

Do I need a membrane under gravel?

On bare soil, a weed-control fabric keeps weeds down; the calculator counts its rolls with a 100 mm lap at each join, as a check. Under a sub-base, a geotextile is used instead.

Related guides

Everything is worked out in your browser, and BuildBatch never sends the figures you type unless you sign in to an account and save a project. BuildBatch counts which tools are used, without a cookie. The bag's own figure and the job's design come first. How the estimates are worked out.