MOT Type 1 calculator
Type 1 sub-base in bags, and its weight.
An example driveway
A 6 × 3 m driveway, Type 1 sub-base
- Type 1
- 8 bulk bags. about 6.4 t · 3 m³ needed. 0.07 m³ left over
Built with AI tools; not yet checked by a tradesperson.
MOT Type 1 sub-base for a path, a driveway or a shed base, in bulk bags or 25 kg bags, with its weight.
Want a figure before you measure? See the bulk bags of Type 1 an area takes, by its size.
Having it done, laying a gravel driveway: labour only, £300 to £800 per job; with materials, £40 to £100 per m² and £1,200 to £2,500 per job; materials not stated, £40 to £100 per m². These are published UK figures, each its publisher's own, and not a quote: every figure, its source and the sum for a room: laying a gravel driveway.
How the number is worked out, a worked example and questions
How the number is worked out
- Measure the area. Its length and width, or its area, or draw its shape. Nothing is added past the edge: a base that runs past its edging is measured that much bigger.
- Choose what it is for. The depth starts at the typical one for the use, compacted: 100 mm for a path or a shed base, the top of the figures in makers' and suppliers' guides, and 150 mm for a driveway, the figure five of them give; one supplier gives 150 to 200 mm. Type the depth decided for your job and that is used instead.
- The volume and the bags. The area times the depth is the volume once compacted; 10% is added for spreading and an uneven dig, BuildBatch's own figure. A bulk bag of Type 1 makes about 0.38 m³ once compacted and a 25 kg bag about 0.012 m³, so no settlement is added. Until you choose, the count is in 25 kg bags where 20 of them or fewer cover it, and in bulk bags above that.
- What it weighs. The bags at their own weight, about 800 kg a bulk bag, and the amount at a typical 2.1 t a cubic metre once compacted. More than 10 bulk bags is said to be a large amount, with a loose load by the tonne as the other way it is sold, worked at 2.3 t a cubic metre, the top of the figures, so the load is not short.
This is a material quantity, not a design. It decides no depth for the ground, no level, no fall and no drainage: those are a designer's, the product's instructions or building control's.
Where the figures come from. The 10% is BuildBatch's own allowance, not a maker's figure. The depths by use, the 1.3 times the depth it is spread at before compacting, and what a bag makes and weighs are typical figures, read on 12 and 30 October 2026, each with the page it was read on, on the sources page, with the other typical figures.
A worked example
A driveway 6 m × 3 m is 18 m². Type 1 at 150 mm compacted, the typical depth for a driveway, with 10% for spreading and an uneven dig. The bags are counted from typical figures, not a product's own: what the bag you buy says comes first.
| Working | Figure | Result |
|---|---|---|
| Driveway area | 6 m × 3 m | 18 m² |
| Type 1, compacted, at the typical depth for a driveway | 150 mm | 2.7 m³ |
| With the allowance for spreading and an uneven dig | 10% | 2.97 m³ |
| In bulk bags of about 0.38 m³ once compacted, rounded up | 7.815789 | 8 bulk bags |
| Or in 25 kg bags of about 0.012 m³ | 0.012 m³ | 248 bags |
| What the bulk bags weigh, about 800 kg each | 800 kg | 6.4 t |
| What 2.97 m³ weighs at a typical figure for Type 1 once compacted | 2.1 t a cubic metre | 6.237 t |
| How deep to spread it before compacting | × 1.3 | 195 mm |
The two weights differ because a bag is sold by weight and the amount is worked by volume: the bags are what to buy, and the weight says what a delivery or a trailer has to carry. Laid at 100 mm, the depth for a path or a shed base, the same area takes 6 bulk bags.
Work it out for your room, starting from the example driveway's sizes.
Stop and check first
- The depth is for the ground and the use. Soft or clay ground, a van or a heavier car, or a base under a building may need more than the typical figure. One supplier's guide gives 150 to 200 mm for a driveway; the calculator counts the depth you type.
- Compact it in layers. Spread it about 1.3 times as deep as it is to end up, and compact it with a plate compactor in layers of no more than 75 mm.
- A membrane on soft ground. A geotextile under the Type 1 keeps it from being pressed into soft soil. The calculator counts its rolls as a check, lapped 900 mm at each join and roll end, the top of the makers' figures for soft ground, in rolls 4.5 m wide and 11 m long, a typical size of the rolls a driveway's geotextile is sold in: a 6 m × 3 m driveway takes one roll. Whether the ground needs one is the ground's.
- A large amount. More than 10 bulk bags is a lot to barrow: it is also sold as a loose load by the tonne, tipped from a lorry. Ask about the access, the smallest load and whether any left over can go back.
Questions
How much MOT Type 1 do I need for a 6 m by 3 m driveway?
8 bulk bags at 150 mm compacted, with 10% for spreading: 2.97 m³, about 6.4 t of bags.
How deep should a sub-base be?
Most guides read give 75 to 100 mm for a patio or a garden path and 100 to 150 mm for a driveway, compacted; the calculator starts at the top of each, so the bags do not run short. One supplier gives 150 to 200 mm for a driveway for cars and light vans. The ground and the use decide the real depth.
How many square metres does a bulk bag of Type 1 cover?
About 3.8 m² at 100 mm and 2.5 m² at 150 mm once compacted, from a bag of about 0.38 m³ compacted: a typical figure, worked from what Type 1 weighs in place. What a bag says on its own label comes first.
Why does the weight of the bags differ from the weight of the amount?
A bulk bag is sold as about 800 kg; the amount is worked by volume at a typical 2.1 t a cubic metre once compacted. Both are shown, and the bags are what to buy.
Can I put gravel on top?
Yes: choose gravel over Type 1 and both layers are counted, the gravel loose at 50 mm, the typical depth for a path, a border or a driveway. The gravel calculator starts on gravel alone.