How many coats of paint do I need?
The tin says, for that paint and that surface, and BuildBatch works with the number you enter. It starts at 2 coats, a typical figure. For the walls of a 4 m × 3 m room 2.4 m high, at a typical 12 m² per litre with 10% extra, one coat needs 2.8 L, two coats 5.7 L and three coats 8.5 L: 5 L, 7.5 L and 10 L in 2.5 and 5 L tins.
Read here; this page sends and keeps nothing.
Work out the paint for this room, then change it to yoursThe planner can count a shop's own tins, so its count may differ.

The sum
Paint needed in litres = area × coats ÷ coverage × (1 + extra ÷ 100). Coats is a whole number from 1 to 10, and the litres go up in step with it. The sum is worked through in how much paint do I need?
One room at 1, 2 and 3 coats
A room 4 m × 3 m and 2.4 m high, with one internal door 762 mm × 1981 mm and one window 0.9 m × 1.2 m taken off, the planner’s own example room. The walls come to 31.01 m² (33.6 m² less 2.59 m²) and the ceiling to 12 m². The coverage and the tins are the planner’s typical figures, not the figures of any one paint: 12 m² per litre, in 2.5 and 5 L tins for the walls and 2.5, 5 and 10 L tins for the ceiling. The 10% extra is its example. Only the coats change.
| Coats | Walls need | Walls: tins | Ceiling needs | Ceiling: tins |
|---|---|---|---|---|
| 1 | 2.8 L | 1 × 5 L (5 L) | 1.1 L | 1 × 2.5 L (2.5 L) |
| 2 | 5.7 L | 1 × 5 L + 1 × 2.5 L (7.5 L) | 2.2 L | 1 × 2.5 L (2.5 L) |
| 3 | 8.5 L | 2 × 5 L (10 L) | 3.3 L | 1 × 5 L (5 L) |
- The litres rise in step. Each coat adds about 2.8 L to the walls and 1.1 L to the ceiling.
- The tins rise in whole tins. A third coat on the walls takes two 5 L tins in place of a 5 L tin and a 2.5 L tin, and leaves about 1.5 L. A third coat on the ceiling takes a 5 L tin in place of a 2.5 L one, leaving about 1.7 L where two coats left about 0.3 L.
What BuildBatch starts with
2 coats and 12 m² per litre, with 10% extra, in the tins that leave least over. The coats and the coverage are typical figures, found from the makers’ own figures for the 103 emulsions read for BuildBatch’s catalogue, and each paint line says “2 coats (typical figure)” until you change it. They are there so that you can get an answer before you have a tin: they are not the figures of your paint and not a recommendation.
The tin decides
The tin’s own instructions decide the number of coats for that paint and that surface. BuildBatch does not know your paint, so it takes what the tin says: how many coats, how many m² a litre covers in one coat, and the tin’s size. Set the coats from the tin, and the litres and tins follow.
The planner asks two things about coats, in the open:
- “Going much lighter or darker?” Yes adds one coat to the walls. Makers say a strong change of colour may need more coats and give no number, so the one coat is BuildBatch’s own, said on the line: for the example walls, 5.7 L becomes 8.5 L.
- “Is any of it new or bare plaster?” Yes adds a mist coat on a line of its own, one thinned coat of white contract matt over the walls and the ceiling together: 3.9 L for the example room, in a 5 L tin. The two top coats are not changed. A primer-sealer instead is a different product, bought for the same area; the paint’s instructions for bare plaster decide. See painting new plaster: mist coat, primer and how many coats.
Coats and coverage together
The tin gives two figures that move the answer, the coats and the coverage. The walls of the same room, in litres, at the planner’s typical 12 m² per litre and at a lower and a higher figure:
| Coverage | 1 coat | 2 coats | 3 coats |
|---|---|---|---|
| 10 m² per litre | 3.4 L | 6.8 L | 10.2 L |
| 12 m² per litre | 2.8 L | 5.7 L | 8.5 L |
| 14 m² per litre | 2.4 L | 4.9 L | 7.3 L |
How far does 2.5 L of paint go? goes through the coverage on its own.
Do it with BuildBatch
Open the planner on paint, type the room, and tap “Big colour change?” or “New plaster?” under the cost if either is true. Under “Coats, coverage, spare and tin” in “Change the figures”, set the coats to the number on your tin and type what a litre covers and the tin size. It gives the tins for the walls and the ceiling, and each paint’s line in the shopping list has the litres and what is left over.
The paint calculator works it out for your own room: the walls and the ceiling, in litres and tins, and what they cost where a partner shop’s prices are shown.
What this guide does not cover
How many coats a particular paint, colour, surface or finish needs: the tin and the maker’s data sheet say. Primer and undercoat figures, which come from their own tins. Woodwork, though the planner adds a woodwork paint line when “Woodwork” is ticked, or plans the woodwork on its own with “Walls” and “Ceiling” unticked: two coats of satinwood at a typical 16 m² a litre, the middle of two makers’ “up to” figures and said so on the line. Exterior and masonry paint. Which tin size costs less, which is in 2.5 litre or 5 litre tin: which costs less?
Related guides
Questions
How many coats of paint do I need for walls?
The tin says, for that paint and that surface. BuildBatch starts at 2 coats, a typical figure, and you replace it with the tin's number. At a typical 12 m² per litre, the walls of a 4 m × 3 m room 2.4 m high need 5.7 L for two coats.
How much more paint does a third coat need?
About half as much again as two coats. The walls of the example room go from 5.7 L to 8.5 L, which is a 5 L tin and a 2.5 L tin to two 5 L tins. Its ceiling goes from 2.2 L to 3.3 L, which is a 2.5 L tin to a 5 L tin.
How much paint for one coat?
The same room needs 2.8 L for the walls and 1.1 L for the ceiling at a typical 12 m² per litre with 10% extra: a 5 L tin for the walls and a 2.5 L tin for the ceiling. Whether one coat is enough is for the tin to say.
Does a mist coat count as a coat?
Not of the finish paint. When you answer that the plaster is new or bare, the planner counts the mist coat on a line of its own: one thinned coat of white contract matt over the walls and the ceiling together, 3.9 L for the example room, in a 5 L tin. The two top coats stay as they are. The paint's instructions for bare plaster decide.