Farrow & Ball Estate Emulsion
Emulsion paint · Farrow & Ball
Farrow & Ball Estate Emulsion covers up to 14 m² a litre and takes 2 coats, by Farrow & Ball's own figures.
The walls of a 3 × 4 m room, 2.4 m high, need 4.9 L: 1 × 5 L to buy, at Farrow & Ball's coverage and coats, with BuildBatch's example 10% extra for waste.
At 12 m² a litre, BuildBatch's typical figure for emulsion, the same walls need 5.7 L: 1 × 5 L + 1 × 2.5 L.
- Coverage
- up to 14 m²a litreFarrow & Ball's figure
- Coats
- 2Farrow & Ball's figure
- Tin sizes
- 2.5 L, 5 L2 sizes in the catalogue
- A 3 × 4 m room
- 1 × 5 Lwalls, at the maker's figure
How many tins for a room
The walls of a 3 × 4 m room, 2.4 m high, need 4.9 L: 1 × 5 L to buy, at Farrow & Ball's coverage and coats, with BuildBatch's example 10% extra for waste. The other sizes are below, each worked out by the planner from the maker's coverage and coats.
| Room | Walls to paint | At the maker's figure | At 12 m² a litre | Your room |
|---|---|---|---|---|
| 2.5 × 3 m8.2 × 9.8 ft | 23.81 m² | 1 × 5 L3.7 L needed | 1 × 5 L4.4 L needed | Start from this room, 2.5 × 3 m |
| 3 × 3 m9.8 × 9.8 ft | 26.21 m² | 1 × 5 L4.1 L needed | 1 × 5 L4.8 L needed | Start from this room, 3 × 3 m |
| 3 × 4 m9.8 × 13.1 ft | 31.01 m² | 1 × 5 L4.9 L needed | 1 × 5 L + 1 × 2.5 L5.7 L needed | Start from this room, 3 × 4 m |
| 4 × 4 m13.1 × 13.1 ft | 35.81 m² | 1 × 5 L + 1 × 2.5 L5.6 L needed | 1 × 5 L + 1 × 2.5 L6.6 L needed | Start from this room, 4 × 4 m |
| 4 × 5 m13.1 × 16.4 ft | 40.61 m² | 1 × 5 L + 1 × 2.5 L6.4 L needed | 1 × 5 L + 1 × 2.5 L7.4 L needed | Start from this room, 4 × 5 m |
- Each room is 2.4 m high with one internal door and one window of 0.9 × 1.2 m taken off. Walls only: a ceiling and the woodwork are separate paints.
- Up to 14 m² per litre and 2 coats are the maker's own figures, shown with their source below. A maker's coverage is their best case, on a smooth sealed surface: bare, rough or absorbent walls take more.
- The figures at 12 m² a litre are the same room at BuildBatch's typical coverage for emulsion, the figure its planner counts a paint at until a tin's own is entered: the lower middle of the makers' own figures in its catalogue. They are not this maker's.
- The 10% extra for waste and touch-ups is BuildBatch's example, not the maker's.
- The tins are the fewest that cover the paint needed, or one more where that leaves less over, from the sizes listed on this page; where another combination leaves even less over, it is said under the row. No prices are compared.
- The planner's working for the 3 × 4 m room: Walls: 31.01 m², 2 coats at 14 m² per litre, plus 10% for waste and touch-ups.
- Worked out by the planner when this page was built: follow the tin's own instructions.
Where to buy it
The shops' own searches for it, and one shop's price for a different product of the same kind. BuildBatch sells nothing and ranks no prices.
Search the shops for Farrow & Ball Estate Emulsion
- Amazon UK, opens in a new tab
- B&Q, opens in a new tab
- Homebase, opens in a new tab
- Screwfix, opens in a new tab
- Toolstation, opens in a new tab
- Wickes, opens in a new tab
Each link opens that shop’s own search for this product, in a new tab. BuildBatch does not know whether a shop has it, or what it costs there today.
A different wall paint at Travis Perkins
BuildBatch has no partner shop's price for Farrow & Ball Estate Emulsion. This is another product, named as Travis Perkins names it.
- 10 L tinArmstead Trade Contract Matt 10L Magnolia£21.80 including VAT, before delivery
Travis Perkins' own price on 5 November 2026, including VAT, as the file of prices it publishes gave it. Travis Perkins' own listing gives £30.00 delivery for this product; its delivery page has the threshold for free delivery and collection. This is a different product from Farrow & Ball Estate Emulsion: its coverage, its coats and its colours are its own, and no figure on this page is its figure. It is the first by name of the 25 products of its kind in the file of prices Travis Perkins publishes, not chosen for its price. You buy from Travis Perkins, on its terms: its page has the price, the delivery charge and your right to cancel as they are today. Its delivery page, opens in a new tab.
Ad A link marked Ad is advertising: BuildBatch is paid a commission if you buy after following it. The other links earn BuildBatch nothing. The figures on this page are the same either way. How BuildBatch is paid.
The shops' own searches for it. BuildBatch sells nothing and ranks no prices.
Search the shops for Farrow & Ball Estate Emulsion
- Amazon UK, opens in a new tab
- B&Q, opens in a new tab
- Homebase, opens in a new tab
- Screwfix, opens in a new tab
- Toolstation, opens in a new tab
- Wickes, opens in a new tab
Each link opens that shop’s own search for this product, in a new tab. BuildBatch earns nothing from these links. BuildBatch does not know whether a shop has it, or what it costs there today.
Coverage
Farrow & Ball states up to 14 m² a litre for Farrow & Ball Estate Emulsion. The planner counts that figure once for each coat.
“Coverage Rate (m2/l per coat): Up to 14”
When the figure runs short
- Bare, rough or absorbent surfaces
- A maker's coverage is their best case, on a smooth sealed surface: bare, rough or absorbent walls take more.
- A strong change of colour
- Farrow & Ball says: “Darker/stronger colours may require additional coats”. Each extra coat is the paint of one coat again.
- Waste and touch-ups
- The room table adds 10% for what stays in the tray and on the roller and for touching up: BuildBatch's example, not the maker's. The tin-by-tin figures add nothing.
- The ceiling and the woodwork
- Neither is in these figures. Each is a separate paint and a separate line on a list.
Coats
Farrow & Ball gives 2 coats for Farrow & Ball Estate Emulsion. Each coat covers the same wall again, so the litres are the area times the coats, divided by the coverage.
“Darker/stronger colours may require additional coats”
Tin sizes
Farrow & Ball Estate Emulsion is listed in 2.5 L and 5 L. The square metres one tin covers at the stated rate are arithmetic on the maker's figure: the litres in the tin times the coverage per litre, with nothing added for waste.
| Tin | One coat | 2 coats |
|---|---|---|
| 2.5 L | up to 35 m² | up to 17.5 m² |
| 5 L | up to 70 m² | up to 35 m² |
Questions about Farrow & Ball Estate Emulsion
How much does a litre of Farrow & Ball Estate Emulsion cover?
Farrow & Ball states up to 14 m² a litre (Estate Emulsion product advice sheet, read 29 September 2026). A maker's coverage is their best case, on a smooth sealed surface.
How much does a 5 litre tin of Farrow & Ball Estate Emulsion cover?
At the maker's figure a 5 L tin covers up to 70 m² in one coat, or up to 35 m² in 2 coats. That is the litres times the coverage per litre, with nothing added for waste.
How many coats does Farrow & Ball Estate Emulsion need?
Farrow & Ball gives 2 coats, adding: “Darker/stronger colours may require additional coats”.
How many tins of Farrow & Ball Estate Emulsion for a 3 × 4 m room?
The walls of a 3 × 4 m room, 2.4 m high, need 4.9 L: 1 × 5 L to buy, at Farrow & Ball's coverage and coats, with BuildBatch's example 10% extra for waste. At 12 m² a litre, BuildBatch's typical figure for emulsion, the same walls need 5.7 L: 1 × 5 L + 1 × 2.5 L. The room is 2.4 m high with one door and one window taken off, 2 coats.
What tin sizes does Farrow & Ball Estate Emulsion come in?
The catalogue lists 2.5 L and 5 L. A shop may not stock every size.
Other emulsion paints
In alphabetical order, with each maker's own figures. A maker measures its coverage its own way, so the figures are not a test of one paint against another. Every product under emulsion paint.
Fired Earth
- Coverage
- 14 m² a litre
- Coats
- 2 coats
- Tins
- 2.5 L and 5 L
Johnstone's Trade Acrylic Durable Matt
Johnstone's Trade · Matt
- Coverage
- about 11 to 13 m² a litre
- Coats
- 2 coats
- Tins
- 2.5 L, 5 L and 10 L
Johnstone's Trade Cleanable Matt
Johnstone's Trade · Matt
- Coverage
- up to 15 m² a litre
- Tins
- 2.5 L, 5 L and 10 L
Johnstone's Trade Covaplus Vinyl Matt
Johnstone's Trade · Matt
- Coverage
- up to 17 m² a litre
- Tins
- 1 L, 2.5 L, 5 L and 10 L
More from Farrow & Ball
2 of the 9 other Farrow & Ball products in the catalogue, by name. All Farrow & Ball products.
- Coverage
- up to 12 m² a litre
- Coats
- 2 coats
- Tins
- 2.5 L and 5 L
- Coverage
- up to 12 m² a litre
- Coats
- 2 coats
- Tins
- 2.5 L and 5 L
Where the figures come from
- Coverage and coats: Farrow & Ball, Estate Emulsion product advice sheet. Read on 29 September 2026.
The figures are the maker's, and a maker's figure is their best case: follow the tin's own instructions.
- Is paint coverage per coat?: what a figure per litre means, and how to read the one on a tin.
- How many coats of paint do I need?: when two coats are enough, and what a third costs in litres.
- How far does 2.5 L of paint go?: what 1, 2.5, 5 and 10 litre tins cover at three coverages.
- Mist coat ratio: why bare plaster takes more paint than any figure on a tin.
- What you need to paint a room: everything else the job takes, from filler to dust sheets.
- Paint calculator: the litres and tins for a coverage of your own.
- How we compare products: what “worked out” and “Ad” mean on these pages.